Brake lights not working
Posted: Sat Oct 30, 2021 4:32 pm
My brake lights on my 2016 PX2 XLT currently do not work. The position/park lights work fine, as do the indicators and the reversing light. No blown fuses, no error codes popping up. I have installed new bulbs but still not operating. The high stop light does operate.
I did do the parking light DRL enablement recently. Here is the setting I have in the BdyCM module for enabling the DRLs. Not sure if related or not.
Any advice appreciated as do not like driving without a full complement of working lights.
Edit: just hooked up the trailer, and the brake lights on the trailer work, leading me to think a wiring issue at the rear of the vehicle. have tried disconnecting the harness at the rear and reconnecting but no change.
Second edit: checked voltage at globe plug with multimeter and no power for brake circuit. Now to trace back through the harness, oh what joy.
I did do the parking light DRL enablement recently. Here is the setting I have in the BdyCM module for enabling the DRLs. Not sure if related or not.
Any advice appreciated as do not like driving without a full complement of working lights.
Edit: just hooked up the trailer, and the brake lights on the trailer work, leading me to think a wiring issue at the rear of the vehicle. have tried disconnecting the harness at the rear and reconnecting but no change.
Second edit: checked voltage at globe plug with multimeter and no power for brake circuit. Now to trace back through the harness, oh what joy.