Hi
Posted: Wed May 04, 2022 4:03 pm
Hi, joining from New Zealand. Have been recommended this forum as I have a pesky very rare and intermittent fault with a 2013 Ranger XLT that is putting it into limp mode and only giving a generic P0089 code. It normally does this with a fully loaded truck+trailer trying to run up the hill behind you which gets interesting when you suddenly can't accelerate...
I have an OBDLink MX+ dongle that I'm hoping to be able to set up to datalog the fuel system - which means finding the PID codes and working out how to correct the data values...
The data I'm hoping to be able to collect is the fuel rail actual pressure, fuel rail commanded pressure, rpm, fuel temperature, SCVduty%, and probably injector duty %... Hopefully with that data, we can work out exactly what is causing it to trip into limp mode - all going well.
Cheers
I have an OBDLink MX+ dongle that I'm hoping to be able to set up to datalog the fuel system - which means finding the PID codes and working out how to correct the data values...
The data I'm hoping to be able to collect is the fuel rail actual pressure, fuel rail commanded pressure, rpm, fuel temperature, SCVduty%, and probably injector duty %... Hopefully with that data, we can work out exactly what is causing it to trip into limp mode - all going well.
Cheers