Adding Traction Control and Hill Decent
Posted: Sat Jul 25, 2020 4:16 am
Hi all,
Looking for some advice.
I have a 2012 2.2 XLS PX1 in South Africa, It was quite a base model without any of the nice creature comforts.
My next project that I'm attempting is adding Hill Assist, Hill Decent Control and Traction Control, as these work together from my understanding.
I have the wiring for both TC and HDC buttons, so bought them and installed them. I enabled HDC on Forscan and... Nothing.
I checked the wiring diagram and see the TC and HDC works with the ABS Module. My Integrated vechicle dynamic control is set to ABS Only. After taking the risk and changing the option through all of the available ones, the only one that the ABS Module took is IVD Something, can't exactly remember and didn't take a screen shot. Its something like IVD (enhanced ESP and CC). After setting that one and relearning the ABS module I TC and HDC lights are on the cluster, but the ABS light stays on with Error U2300:64-AB : Signal Plausibility Fault.
I checked the wiring harness on the ABS pump and I seem to have all the pins, even these from the HDC and TC buttons.
So I'm thinking there might be one of two problems here. Or I don't have a Steering Angle Sensor in my clock spring ( the harness has the wires but not sure how to confirm I have one) or the ABS Module only supports ABS as its set and I'll need to get a XLT one.
Thanks for reading!
Looking for some advice.
I have a 2012 2.2 XLS PX1 in South Africa, It was quite a base model without any of the nice creature comforts.
My next project that I'm attempting is adding Hill Assist, Hill Decent Control and Traction Control, as these work together from my understanding.
I have the wiring for both TC and HDC buttons, so bought them and installed them. I enabled HDC on Forscan and... Nothing.
I checked the wiring diagram and see the TC and HDC works with the ABS Module. My Integrated vechicle dynamic control is set to ABS Only. After taking the risk and changing the option through all of the available ones, the only one that the ABS Module took is IVD Something, can't exactly remember and didn't take a screen shot. Its something like IVD (enhanced ESP and CC). After setting that one and relearning the ABS module I TC and HDC lights are on the cluster, but the ABS light stays on with Error U2300:64-AB : Signal Plausibility Fault.
I checked the wiring harness on the ABS pump and I seem to have all the pins, even these from the HDC and TC buttons.
So I'm thinking there might be one of two problems here. Or I don't have a Steering Angle Sensor in my clock spring ( the harness has the wires but not sure how to confirm I have one) or the ABS Module only supports ABS as its set and I'll need to get a XLT one.
Thanks for reading!