I have come across two issues that I wondered if others have had.
1. I seem to have lost the main screen of Torque and so I am unable to quit the app. think I set it up to open on my screen but I am not able to find the main home screen now. It was intermittent for a while but now nothing. I don't really want to re-install as I will have to reload the PID etc.
2. Sometimes when I start the Ranger, it starts into an error mode, parking, esc other features pop up errors due to the sensors I believe. Can't really drive it until I either remove the dongle or the app connects and seems to clear it. I wondered if it was due to me not quitting the app but as per 1) I can't quit it.
Any thoughts?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Issues using Torque with OBDlink Mx
-
seany-boy
- Donator
- Posts: 25
- Joined: Mon Apr 15, 2019 4:00 pm
- Location: Melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
2018 XLT. Koni/Bilstein shocks , SSA modified rear springs, ended up with about 30-40mm lift on rear, set the fronts to about a 15mm lift.
-
RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Maybe install the OBDLink app and see if that helps to clear the codes.
2018 XLT PX2 in Winning Blue