Re: New features coming to Forscan
Posted: Mon Aug 20, 2018 8:50 am
Page 4 of 4
Re: New features coming to Forscan
Posted: Mon Jan 07, 2019 7:51 am
Hi guys,
I hope this is the right post.
I've done some setting test on the IPC module. I have enabled some, I have enabled and disabled others and some others seem not to work on my Ranger.
At the end of these tests I noticed that the clock on the display had disappeared and in its place there were dashes (-: -).
I then rewritten the data with the original saving of the ICP module and the time has reappeared correctly.
At this point I thought to enable one function at a time and check what happened with the clock.
I have therefore enabled the "Climate Menu" and the clock has disappeared again.
I have once again reset the original conditions, but the clock has not returned.
Please can you help me restore the watch?
I've encountered other problems, but I think it's better to solve one thing at a time ...
Thank you
I hope this is the right post.
I've done some setting test on the IPC module. I have enabled some, I have enabled and disabled others and some others seem not to work on my Ranger.
At the end of these tests I noticed that the clock on the display had disappeared and in its place there were dashes (-: -).
I then rewritten the data with the original saving of the ICP module and the time has reappeared correctly.
At this point I thought to enable one function at a time and check what happened with the clock.
I have therefore enabled the "Climate Menu" and the clock has disappeared again.
I have once again reset the original conditions, but the clock has not returned.
Please can you help me restore the watch?
I've encountered other problems, but I think it's better to solve one thing at a time ...
Thank you
Re: New features coming to Forscan
Posted: Mon Jan 07, 2019 4:22 pm
Just change the time up an hour, down an hour on the radio and it will revert back. This is the quickest way anyway.VxOFF wrote: ↑Mon Jan 07, 2019 7:51 am Hi guys,
I hope this is the right post.
I've done some setting test on the IPC module. I have enabled some, I have enabled and disabled others and some others seem not to work on my Ranger.
At the end of these tests I noticed that the clock on the display had disappeared and in its place there were dashes (-: -).
I then rewritten the data with the original saving of the ICP module and the time has reappeared correctly.
At this point I thought to enable one function at a time and check what happened with the clock.
I have therefore enabled the "Climate Menu" and the clock has disappeared again.
I have once again reset the original conditions, but the clock has not returned.
Please can you help me restore the watch?
I've encountered other problems, but I think it's better to solve one thing at a time ...
Thank you
Re: New features coming to Forscan
Posted: Mon Jan 07, 2019 11:00 pm
Thanks a lot!!!
Inviato dal mio SM-G960F utilizzando Tapatalk
Inviato dal mio SM-G960F utilizzando Tapatalk
Re: New features coming to Forscan
Posted: Wed Jan 09, 2019 1:53 am
Hi Stewart,
With the .19 Beta release is it possible to change the front and rear 12volt sockets in my 2018 Everest Platinum+ 2.0Litre so that they turn off with the ignition. I have tried the Ranger+the150 Mods without success.
With the .19 Beta release is it possible to change the front and rear 12volt sockets in my 2018 Everest Platinum+ 2.0Litre so that they turn off with the ignition. I have tried the Ranger+the150 Mods without success.
Re: New features coming to Forscan
Posted: Thu Jan 10, 2019 1:45 pm
Hi Mate,
Ranger+the150 Mods? Can you explain?
Can you post a screen shot of what you are trying to change at all or explain how and where.
Thank you.
Re: New features coming to Forscan
Posted: Fri Jan 11, 2019 3:46 am
Hi Stewart,
The modifications on the spreadsheets (Powerpoints) for the Ranger and F-150 with Forscan that are online.
But Ford must have changed them for the 2018 Titanium Plus 2.0L.
I would like the 12volt points at dash and at the left inside tailgate to switch off with engine or within 5-10 seconds of pressing ignition off.
I use a front and rear dashcam but have to physically pull out the plug from said sockets otherwise they stay on overnight when the car is parked.
I apologize for being an ass with this, but would love to see a mod sheet for the latest Everest Platinum+ (2018 2.0L) as they appear to have changed from the earlier models (ie Ranger and F150 and maybe Raptor).
Much Thanx in advance.
The modifications on the spreadsheets (Powerpoints) for the Ranger and F-150 with Forscan that are online.
But Ford must have changed them for the 2018 Titanium Plus 2.0L.
I would like the 12volt points at dash and at the left inside tailgate to switch off with engine or within 5-10 seconds of pressing ignition off.
I use a front and rear dashcam but have to physically pull out the plug from said sockets otherwise they stay on overnight when the car is parked.
I apologize for being an ass with this, but would love to see a mod sheet for the latest Everest Platinum+ (2018 2.0L) as they appear to have changed from the earlier models (ie Ranger and F150 and maybe Raptor).
Much Thanx in advance.
Re: New features coming to Forscan
Posted: Sat Jan 12, 2019 4:24 pm
PM me your VIN.bartpix wrote: ↑Fri Jan 11, 2019 3:46 am Hi Stewart,
The modifications on the spreadsheets (Powerpoints) for the Ranger and F-150 with Forscan that are online.
But Ford must have changed them for the 2018 Titanium Plus 2.0L.
I would like the 12volt points at dash and at the left inside tailgate to switch off with engine or within 5-10 seconds of pressing ignition off.
I use a front and rear dashcam but have to physically pull out the plug from said sockets otherwise they stay on overnight when the car is parked.
I apologize for being an ass with this, but would love to see a mod sheet for the latest Everest Platinum+ (2018 2.0L) as they appear to have changed from the earlier models (ie Ranger and F150 and maybe Raptor).
Much Thanx in advance.
Re: New features coming to Forscan
Posted: Sun Jan 13, 2019 10:49 pm
Mate just picked up a PX3 and it looks like they now have TPMS Pressures showing on the right screen.
I haven't had mine long enough to have experience with Ford backporting features, is this something we'll likely have access too on the PX2's at some stage eith via Forscan or Ford directly?
I haven't had mine long enough to have experience with Ford backporting features, is this something we'll likely have access too on the PX2's at some stage eith via Forscan or Ford directly?
Re: New features coming to Forscan
Posted: Mon Jan 14, 2019 1:33 am
Most likely not. Firmware would only be available if there was an update.
I'm not holding out for one anytime soon.
I'm not holding out for one anytime soon.
Re: New features coming to Forscan
Posted: Tue Jan 15, 2019 8:04 pm
It appears all SOC and critical parameters are turned off in the BCM for your vehicle. So its either how it is for your area or the programming is wrong. All critical state of charge lines are 0% so I cannot see how the vehicle would shut down before a flat battery.bartpix wrote: ↑Fri Jan 11, 2019 3:46 am Hi Stewart,
The modifications on the spreadsheets (Powerpoints) for the Ranger and F-150 with Forscan that are online.
But Ford must have changed them for the 2018 Titanium Plus 2.0L.
I would like the 12volt points at dash and at the left inside tailgate to switch off with engine or within 5-10 seconds of pressing ignition off.
I use a front and rear dashcam but have to physically pull out the plug from said sockets otherwise they stay on overnight when the car is parked.
I apologize for being an ass with this, but would love to see a mod sheet for the latest Everest Platinum+ (2018 2.0L) as they appear to have changed from the earlier models (ie Ranger and F150 and maybe Raptor).
Much Thanx in advance.
At the same time though, the power point time out is already set to 1 second.
Any chance you can get the VIN from another local vehicle that is the same as yours? I want to make sure it is not a mistake before changing anything.
Re: New features coming to Forscan
Posted: Sun Jan 20, 2019 1:57 am
Hi Stewart,
Not sure if the last message was sent to you, so below please find my friends VIN from August 2018 Platinum+ 2.0L.
Not sure if the last message was sent to you, so below please find my friends VIN from August 2018 Platinum+ 2.0L.
Re: New features coming to Forscan
Posted: Sun Feb 24, 2019 9:39 am
Hi Guys,
Could someone please tell me what is "off road gauge" and what is the intelligent 4wd gauge"
Could someone please tell me what is "off road gauge" and what is the intelligent 4wd gauge"
Re: New features coming to Forscan
Posted: Sun Feb 24, 2019 10:06 am
Not real sure but as a guess I would assume off road gauge is the tilt and roll indicators and Intelligent 4wd is the diagram showing the driveline and which wheels drive is being applied... but I have been known to be wrong. 
Re: New features coming to Forscan
Posted: Sun Feb 24, 2019 7:16 pm
Correct Gerry.
Re: New features coming to Forscan
Posted: Wed Aug 14, 2019 11:00 am
I have enabled it through Forscan but tilt and roll doesnt move any reason? Thanks
Re: New features coming to Forscan
Posted: Wed Aug 14, 2019 11:57 am
Apparently our Rangers don't have the required hardware or sensors, which is probably why it's not enabled fro factory.