Page 4 of 5
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sat May 30, 2020 4:03 pm
by saeb
timhuskisson wrote: βWed May 27, 2020 11:39 pm
Hi Saeb,
Tried running the upgrade as per the instruction, I get an error code when the USB launches
"Installation failed Error code: LST_ERR05, Download files again and retry to install, if error persists, please note the code and contact 610-386-133673"
Any ideas?
EDIT: Tried with a separate USB tonight, same error code.
Method
Car running, insert USB - error code comes up after about 5 seconds.
Have tried a 32gb card and an 8, also ensured the car was not connected to any devices via Bluetooth. Any help past this point would be appreciated!
Thanks
Tim
LST_ERR05 LST_PKG_FILE_NOT_FOUND File specified by 'Open' entry in autoinstall.lst not found
So at a guess you have an error inside the autoinstall.lst file. Open it with notpad and show.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Tue Jun 02, 2020 2:28 pm
by teddy1981
Will this process also apply/work on a 2019 Everest running sync 3.3?
saeb wrote: βSun Oct 06, 2019 12:37 pm
This upgrade applies to those with a current Sync version of
3.2/3.3 ONLY.
Android Auto will display directions in the right hand cluster navigation area with 3.4, Carplay will not.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Tue Jun 02, 2020 10:49 pm
by saeb
teddy1981 wrote: βTue Jun 02, 2020 2:28 pm
Will this process also apply/work on a 2019 Everest running sync 3.3?
Yes.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Mon Jun 15, 2020 6:14 am
by Mandelbloom
Anyone fix the climate controls on an XLT with no NAV ? Others are reporting when they use the provided file it has Nav and some other issues . Sorry if I missed a post
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Mon Jun 15, 2020 8:32 am
by Mandelbloom
saeb wrote: βFri May 01, 2020 1:59 pm
bproctor and BKOSH84
Your climate fix for US Sync 3 3.4 Ranger is;
7D0-04-01 xxxx-xx0x-xxxx
Ahh I assume this is it ? I am in NA and itβs a 2019. Get my forscan reader Tuesday .
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Tue Jun 16, 2020 9:24 am
by Mandelbloom
Anyone who did this update(mine was on 2019) have some but not all Sirius/XM channel logos ?
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Wed Jun 17, 2020 5:51 am
by saeb
Mandelbloom wrote: βMon Jun 15, 2020 8:32 am
saeb wrote: βFri May 01, 2020 1:59 pm
bproctor and BKOSH84
Your climate fix for US Sync 3 3.4 Ranger is;
7D0-04-01 xxxx-xx0x-xxxx
Ahh I assume this is it ? I am in NA and itβs a 2019. Get my forscan reader Tuesday .
Thats is correct
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Wed Jun 17, 2020 9:44 am
by Mandelbloom
Yep !! All good now only remaining issues is the missing icons
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Wed Jun 17, 2020 2:34 pm
by saeb
Mandelbloom wrote: βWed Jun 17, 2020 9:44 am
Yep !! All good now only remaining issues is the missing icons
We do not have Sirius/XM in Australia so cannot help you with that.
Not sure if a newer logo calibration file has been released as I have never had a reason to install the original.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Tue Aug 18, 2020 6:24 pm
by Foztrek
Anyone have any issues with Android auto not working after the update? Did mine today and it won't recognise my phone when plugged in.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sat Aug 22, 2020 10:31 pm
by saeb
Do a master reset of the Sync3 and try again. Have done a ton of them and never had an issue.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sat Sep 05, 2020 12:04 pm
by pschofie1
Hi Stuart,
Quick question apart from the visual differences is there any significant difference or new features between Sync 3.3 v.s 3.4, I use apple car play.
Regards,
Paul
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Tue Sep 08, 2020 6:39 pm
by fordboyz
Hi, so my truck was sync 3.0 then the wifi update changed it to 3.2. Can I update to 3.4 or not?? Thanks
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Fri Sep 11, 2020 2:29 pm
by saeb
fordboyz wrote: βTue Sep 08, 2020 6:39 pm
Hi, so my truck was sync 3.0 then the wifi update changed it to 3.2. Can I update to 3.4 or not?? Thanks
Sync 3.0 and 3.2 use different hardware. It has never been possible ever on any unit in the world so that is odd.
3.2 can be updated to 3.4 so by all means try it.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Fri Dec 04, 2020 9:26 pm
by Brente1982
I did the sync 3.0.20092 to 3.4.20196 (I think that was it) update this evening. Went well and everything working. Had a nav error and general settings took ages to become available so I could do a Master reset. Put car into accessories and it seemed to fix it all and Nav worked. Haven't updated the APIM firmware yet to allow radio logos or calm screen yet as you seem to say your dongle isn't up to the task Stewie?
I do prefer the updated interface of 3.3/3.4. And if anything it functions quicker than 3.0 did.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sat Dec 05, 2020 9:10 am
by saeb
Brente1982 wrote: βFri Dec 04, 2020 9:26 pm
I did the sync 3.0.20092 to 3.4.20196 (I think that was it) update this evening. Went well and everything working. Had a nav error and general settings took ages to become available so I could do a Master reset. Put car into accessories and it seemed to fix it all and Nav worked. Haven't updated the APIM firmware yet to allow radio logos or calm screen yet as you seem to say your dongle isn't up to the task Stewie?
I do prefer the updated interface of 3.3/3.4. And if anything it functions quicker than 3.0 did.
Radio Logos are not supported here so no point installing that one.
Using Forscan itself for upgrading the Sync3 is a risk you take. Adaptor is capable, but when testing many months ago I killed a couple of units is all. You shouldn't have issue, I just want you to be aware that risks exist.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sat Dec 05, 2020 12:52 pm
by Brente1982
Yeah all good. I came to realise they arent supported here after posting that. Know all the risks given theyre plasted all over the 'how to' forums
One thing that doesnt work is the distance and time remaining in the left dash console when using android auto for navigation. The street names and distances until a turn has to be made work fine though.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Tue Dec 08, 2020 12:58 pm
by saeb
Brente1982 wrote: βSat Dec 05, 2020 12:52 pm
Yeah all good. I came to realise they arent supported here after posting that. Know all the risks given theyre plasted all over the 'how to' forums
One thing that doesnt work is the distance and time remaining in the left dash console when using android auto for navigation. The street names and distances until a turn has to be made work fine though.
Never has and probably never will, they majority works so that is a bonus.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Fri Jan 22, 2021 11:22 am
by rkrenn
I keep getting the Error code: INSTL_ETT11, which according to this thread
https://community.cyanlabs.net/t/error- ... r11/1978/3
says there is a problem in APIM and it needs to be replaced.
Anyone have any experience with this?
How do I get Ford to do this, warranty expired 3 months ago?
I had the speed sign recoginition update done last year, would that be impacted if I replaced APIM?
I downloaded from multiple computers and used multiple thumb drives and both exfat and fat32. All variations got same error.
Thanks
Richard
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Thu Jan 28, 2021 7:41 pm
by saeb
rkrenn wrote: βFri Jan 22, 2021 11:22 am
I keep getting the Error code: INSTL_ETT11, which according to this thread
https://community.cyanlabs.net/t/error- ... r11/1978/3
says there is a problem in APIM and it needs to be replaced.
Anyone have any experience with this?
How do I get Ford to do this, warranty expired 3 months ago?
I had the speed sign recoginition update done last year, would that be impacted if I replaced APIM?
I downloaded from multiple computers and used multiple thumb drives and both exfat and fat32. All variations got same error.
Thanks
Richard
Appears the nand has to many bad sectors. It will not be repairable. I do have replacement boards but will need the Sync 3 removed and sent to me for repair.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sun Feb 14, 2021 11:18 am
by Boydie
I keep on getting an on screen instruction INSTL - ERR11 and to re-install the downloads and try to re-install.
I've now done this 12 times and not got any further any ideas as to why ? and instruction to phone 610-386-133673
Nothing frustrates like a Ford
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Sun Feb 14, 2021 11:57 am
by RossPat
Boydie wrote: βSun Feb 14, 2021 11:18 am
I keep on getting an on screen instruction INSTL - ERR11 and to re-install the downloads and try to re-install.
I've now done this 12 times and not got any further any ideas as to why ? and instruction to phone 610-386-133673
Nothing frustrates like a Ford
Not certain about this, I would wait If I was you.
https://community.cyanlabs.net/t/error- ... err11/1978
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Mon Feb 15, 2021 10:45 am
by Boydie
RossPat wrote: βSun Feb 14, 2021 11:57 am
Boydie wrote: βSun Feb 14, 2021 11:18 am
I keep on getting an on screen instruction INSTL - ERR11 and to re-install the downloads and try to re-install.
I've now done this 12 times and not got any further any ideas as to why ? and instruction to phone 610-386-133673
Nothing frustrates like a Ford
Not certain about this, I would wait If I was you.
https://community.cyanlabs.net/t/error- ... err11/1978
Thanks for that insight Ross, I'll buy a brand new thumb drive and try downloading it using FAT32 instead of exFAT to see if that makes any difference, as it is I'm really only interested in the map updates so really its nothing lost.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Wed Apr 07, 2021 2:23 am
by onobeka
Can you please detail what this means "Android Auto will display directions in the right hand cluster navigation area with 3.4, Carplay will not"? I mean in comparison with 3.3 in what Carplay is concerned. Also I've been reading reports that the update loses some climate control buttons that need to be activated later on with Forscan. Is this correct?
For my car, Ford's website tells that I have a map update ready, but that the Sync3 is uptodate (which I did myself). It does not look like I will be getting the 3.4 anytime soon. Of course there are important questions: normally after an update, you push back to Ford an update log so they know what is the current version on your truck, I guess this might not work anymore since Ford would qualify the update to 3.4 as an unofficial mod. Secondly, should I update the maps before the update to 3.4? Maps updates is something I do not want to lose.
Re: Sync 3.2/3.3 to 3.4 Upgrade Tutorial
Posted: Wed Apr 07, 2021 9:46 am
by RossPat
My dealer updates my Sync via a flash drive at service time so Ford records created when you download and update via the internet have no bearing for me.
I am on(Cyan) Sync V3.4.2451 and Map version 1.19
No issues other than I get a camera warning on some corners that don't have a camera.
I can update the Sync 3 software only and leave my current maps.
There is an another update available now for Sync 3.4