Page 1 of 1

Forscan MY19 Test Build

Posted: Sat Jan 05, 2019 9:45 pm
by saeb
Can My19 owners please test this Forscan build.

Existing MY15 non asbuilt options have been added and need to be tested.

Please advise on results here.

download/forscanMY19test.exe

Re: Forscan MY19 Test Build

Posted: Fri Jan 18, 2019 10:05 pm
by adrian.robinson.ar
Sorry for the delay. The was on holidays then ute has been in getting a service at Ford and a few bolt on enhancements from ARB. ;)

I am about to go and adjust the fuel tank size and will have a play with the other options should they work.


Cheers

Re: Forscan MY19 Test Build

Posted: Fri Jan 18, 2019 10:25 pm
by adrian.robinson.ar
Sorry for the delay. The was on holidays then ute has been in getting a service at Ford and a few bolt on enhancements from ARB. ;)

Just went and changed a handful of settings which appear to of all worked so far (Have not had the chance to test out the 120kmh & over) but all good so far.
Capture.PNG
Capture.PNG (33.82 KiB) Viewed 530 times
Capture.PNG
Capture.PNG (33.82 KiB) Viewed 530 times
My Vehicle is a 2018 PKIII Wildtrak 2.0L Bi-Turbo.

I have also enabled the heated seat controls on the SYNC 3 unit, which is also fully functional.

Thanks again Stewart for all your help

Re: Forscan MY19 Test Build

Posted: Fri Jan 18, 2019 11:38 pm
by saeb
Great, thank you.

I have had a newer build done to check if tyre size can be changed to a higher value. I'm awaiting feedback on whether it worked or not but as it stands I will call the current as-built compatible.

Re: Forscan MY19 Test Build

Posted: Fri Jan 18, 2019 11:44 pm
by Harryover
Can confirm that the auto stop start disable works 👍

Re: Forscan MY19 Test Build

Posted: Sat Jan 19, 2019 8:35 pm
by saeb
Harryover wrote: Fri Jan 18, 2019 11:44 pm Can confirm that the auto stop start disable works 👍
Thank you.

Is anyone on this thread running larger tyres?

Re: Forscan MY19 Test Build

Posted: Mon Jan 21, 2019 1:27 pm
by bugzila
Any update for Ranger Raptor ?

Re: Forscan MY19 Test Build

Posted: Mon Jan 21, 2019 10:13 pm
by saeb
bugzila wrote: Mon Jan 21, 2019 1:27 pm Any update for Ranger Raptor ?
What are you looking for. I think you will find 99% of changes will work.

Re: Forscan MY19 Test Build

Posted: Tue Jan 22, 2019 1:52 pm
by bugzila
saeb wrote: Mon Jan 21, 2019 10:13 pm
bugzila wrote: Mon Jan 21, 2019 1:27 pm Any update for Ranger Raptor ?
What are you looking for. I think you will find 99% of changes will work.
As I knows some functions can enable via as build such as below.
Country Code (Thai Language Menu)
iTPMS Menu
Off Road Gauge.
Trailer Sway
Power Distribution Display

Re: Forscan MY19 Test Build

Posted: Tue Jan 22, 2019 7:45 pm
by saeb
Quickly looking at the asbuilt, the locations have not changed in the Raptor. Your results may vary depending on what the firmware allows.

Re: Forscan MY19 Test Build

Posted: Fri Jan 25, 2019 11:48 am
by RossPat
I am assuming the GCC Overspeed Warning makes a noise when you reach 120kph, is that right?

Re: Forscan MY19 Test Build

Posted: Tue Jan 29, 2019 10:46 pm
by saeb
RossPat wrote: Fri Jan 25, 2019 11:48 am I am assuming the GCC Overspeed Warning makes a noise when you reach 120kph, is that right?
That is correct. Just a European thing I though in so ay vehicles from overseas can turn it off.

Re: Forscan MY19 Test Build

Posted: Sun Feb 24, 2019 1:07 am
by luigitiu
Is there any code for enabling the offroad gauge of the Ranger Raptor? mine does not have offroad gauge.

Re: Forscan MY19 Test Build

Posted: Sun Feb 24, 2019 7:20 pm
by saeb
luigitiu wrote: Sun Feb 24, 2019 1:07 am Is there any code for enabling the offroad gauge of the Ranger Raptor? mine does not have offroad gauge.
PM me VIN.

Also was this even an option on these cluster as they are different PX2 PX3 clusters. Have you seen it displayed somewhere?

Re: Forscan MY19 Test Build

Posted: Mon Feb 25, 2019 9:59 pm
by saeb
Thread locked version 2.3.20 was release a few weeks ago and includes the tested options.