Ranger Mods

I’ve just swapped a set of PX3 XLT mirrors onto my 2021.75 XLS Sport. Bloke I bought the mirrors off said they were on the car for all over a couple weeks before swapping to clear views.

The right hand indicator works fine. The left hand is not! I’ve swapped the bulbs over and it isn’t that. Pins etc all look ok to me.

Any suggestions?

I’ve seen from other research that the power fold cabling doesn’t go to the switch (seems to vary a lot from model to model). I can live without that.

Just seems odd that the indicator on one side works and not the other.

I have done the same thing. I originally fitted some XLT mirrors to my PX3 to get the heated mirrors and auto fold. I later swapped to some towing mirrors and then discovered that the left indicator wasn't working so also had to add in some extra wiring for that too.

There is quite a bit of wiring missing in the harness.

-Left indicator doesn't work
-Heated mirrors won't work
-Auto fold won't work

I have posted up some info on here as to what needs to be added in regards to get the heated mirrors and auto fold working as that's all I was interested in using at the time I never did the other part for the left indicator.

When I get a sec I can pull the trim off and have a look at what I wired into if you are interested in completing the task?

Some info in the links below
viewtopic.php?t=7863
viewtopic.php?t=7581