Page 1 of 1
Looking for Door Chime Delete
Posted: Thu Nov 07, 2019 5:23 pm
by arrgh.pirate
Hi All..... 2016 XLT with techpac I have been looking for the instructions to use forscan to delete door chimes. Can anyone point me in the right direction??? Cheers.
Re: Looking for Door Chime Delete
Posted: Thu Nov 07, 2019 6:14 pm
by saeb
Start by watching this video.
viewtopic.php?t=1341
Door chimes are in the IPC.
Re: Looking for Door Chime Delete
Posted: Thu Nov 07, 2019 9:23 pm
by arrgh.pirate
Thanks for that.... Didn't see the chimes on first time I looked at video.
Cheers.
Re: Looking for Door Chime Delete
Posted: Mon Jan 27, 2020 2:27 pm
by BradM
Hi Guys,
I’m trying to find the door chimes delete also. I have downloaded the software from the FORScan website and made some other changes, but I am unable to see the IPC module. Any help would be appreciated
Re: Looking for Door Chime Delete
Posted: Mon Jan 27, 2020 3:59 pm
by RossPat
BradM wrote: ↑Mon Jan 27, 2020 2:27 pm
Hi Guys,
I’m trying to find the door chimes delete also. I have downloaded the software from the FORScan website and made some other changes, but I am unable to see the IPC module. Any help would be appreciated
Have you licensed your copy of Forscan?
If Forscan isn't licensed it won't read all the modules.
Which dongle are you using?
Some dongles won't see all the modules as well.
Re: Looking for Door Chime Delete
Posted: Mon Jan 27, 2020 10:53 pm
by saeb
BradM wrote: ↑Mon Jan 27, 2020 2:27 pm
Hi Guys,
I’m trying to find the door chimes delete also. I have downloaded the software from the FORScan website and made some other changes, but I am unable to see the IPC module. Any help would be appreciated
The adaptor you are using is the issue. It is not compatible with MS bus. See store for compatible adaptor as you will be missing halve the modules.
Re: Looking for Door Chime Delete
Posted: Tue Apr 21, 2020 1:20 pm
by Paul Kelf
Guys,
The following may be a simpler method.
I did mine the other day, if only the door chime was this easy.
Seatbelt Minder Deactivating/Activating
Preparation
Apply the parking brake.
Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
Turn the ignition switch to the OFF position.
Close all the vehicle doors from the inside of the vehicle.
Deactivating/Activating
NOTE: Deactivation of the belt minder may also be carried out using IDS. Follow the instructions on the screen.
NOTE: The belt minder can be turned off independently for the driver and the front passenger by performing the following procedure.
Unbuckle the driver's safety belt.
Unbuckle the front passenger's safety belt.
Turn the ignition switch to the ON position (do not start the engine).
Wait until the safety belt warning indicator turns off.
NOTE: This step must be completed within 30 seconds or the procedure must be repeated.
Buckle then unbuckle the safety belt four times, ending with the safety belt unbuckled. Release the red unbuckle switch completely every cycle.
The safety belt warning indicator flashes momentarily to confirm the belt minder status change.
Turn the ignition switch to the OFF position. The deactivation/activation procedure is now complete.
Re: Looking for Door Chime Delete
Posted: Thu Apr 23, 2020 10:23 am
by Paul Kelf
Paul Kelf wrote: ↑Tue Apr 21, 2020 1:20 pm
Guys,
The following may be a simpler method.
I did mine the other day, if only the door chime was this easy.
Seatbelt Minder Deactivating/Activating
Preparation
Apply the parking brake.
Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
Turn the ignition switch to the OFF position.
Close all the vehicle doors from the inside of the vehicle.
Deactivating/Activating
NOTE: Deactivation of the belt minder may also be carried out using IDS. Follow the instructions on the screen.
NOTE: The belt minder can be turned off independently for the driver and the front passenger by performing the following procedure.
Unbuckle the driver's safety belt.
Unbuckle the front passenger's safety belt.
Turn the ignition switch to the ON position (do not start the engine).
Wait until the safety belt warning indicator turns off.
NOTE: This step must be completed within 30 seconds or the procedure must be repeated.
Buckle then unbuckle the safety belt four times, ending with the safety belt unbuckled. Release the red unbuckle switch completely every cycle.
The safety belt warning indicator flashes momentarily to confirm the belt minder status change.
Turn the ignition switch to the OFF position. The deactivation/activation procedure is now complete.
Wow, I must have completely misread the title of this thread :-O
Carry on as you were
