Page 1 of 1
Reverse Camera
Posted: Fri May 17, 2019 6:59 am
by adamsurf76
Hi guys just wanted to ask if someone could help me. The reverse camera works but when i turn my steering wheel the lines dont move. They used to but for some reason now after getting a suspension lift it doesnt. Thanks
Re: Reverse Camera
Posted: Mon May 20, 2019 9:04 pm
by saeb
Possible damaged LIN wire in the loom from the camera to BCM is all I can think of.
Only other reason for it to stop is faulty camera or BCM asbuilt changed incorrectly.
Re: Reverse Camera
Posted: Sat Oct 12, 2019 7:58 pm
by AndrewAus
I'm pretty sure this is an option you can select in the settings on Sync 3. It's under the reverse camera settings somewhere.
Re: Reverse Camera
Posted: Sun Oct 13, 2019 9:01 am
by Moby58
Mine did this once on my old Territory. Disconnect battery for 5 minutes then reconnect fixed it
regards
Alan
====================================
2018 UA Everest Titanium, Shadow Black
Re: Reverse Camera
Posted: Fri Jun 03, 2022 5:22 pm
by Fred2112
Hi All,
I have the same problem as the original post. Did anyone have a fix for this.
I have tried turning it off and on in settings. Have also tried disconnecting battery.
Any other ideas.
Steve
Sent from my iPad using Tapatalk Pro
Re: Reverse Camera
Posted: Fri Jun 03, 2022 7:20 pm
by Bala1
If you have disconnected the battery the steering lines will not work until you have driven forward at 20kph??
If that's not it, sorry I have nothing more.
Re: Reverse Camera
Posted: Sat Jun 04, 2022 10:31 am
by Fred2112
Thanks anyway but had done that.
Sent from my iPad using Tapatalk Pro