Page 1 of 1
FORD RANGER ACM value
Posted: Mon Aug 20, 2018 10:19 pm
by Siener
Good day all.
I made a mistake by writing the wrong value into ACM 727-01-01. Does anyone have the default value for an Ford Ranger 2.2tdci XL, D\C 2016?
I should have saved it first, but didn't do it. Now I need to revert back to what it was originally. Is there maybe a way to get the factory defaults back for the vehicle?
Any help would be great.
Re: FORD RANGER ACM value
Posted: Wed Aug 22, 2018 2:22 pm
by saeb
Have a read of the how to Forscan tutorial. Download your asbuilt from Motorcraft then load the asbuilt file into forscan, write asbuilt data to ACM.
Re: FORD RANGER ACM value
Posted: Thu Nov 01, 2018 1:27 am
by Hansie
PerthRanga wrote: ↑Mon Oct 29, 2018 1:25 am
saeb wrote: ↑Wed Aug 22, 2018 2:22 pm
Have a read of the how to Forscan tutorial. Download your asbuilt from Motorcraft then load the asbuilt file into forscan, write asbuilt data to ACM.
Hi Stewart,
I had a look at this tonight. I backup the Asbuilt modules before I makes changes (however a melted hard drive on an old laptop has lost this data...I now backup to the cloud).
My last update of the PCM by Ford at its service, has caused my AMP's into my batteries to drop dramatically....and never gets back to 100% on both of my batteries and camper trailer batteries have been suffering too. Voltage is fine, and still shows Dual Battery Mode at 100% (i only noticed this PCM change as the cruise control now works in 1kph increments, whereas before it was in 2kph increments)
I have gone to the Motorcraft site, but cannot seem to locate anywhere on that site to download asbuilt data for my VIN or any VIN for that matter.
Do you know where I need to go at the Motorcraft Service site (using the address you provided with asbuilt at the end) ?
Regards
Brett....
Here you go
https://www.motorcraftservice.com/AsBuilt