Ranger Mods

Posted: **Thu Jan 09, 2020 3:39 pm**

Hey everyone, so I finally got my OBDLink EX, which works really well with FORScan. I found some DTCs that I am not clear on. Specifically the B10E7 worries me because it comes up every time ignition is turned on.

Any info?

Code: Select all

===BCMii DTC B10E7:11-6C===
Code: B10E7 - Ignition On Relay

Additional Fault Symptom:
 - Circuit Short To Ground

Status: 
 - DTC Maturing - Intermittent at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC
 - Test not complete

Module: Body Control Module

 Freeze Frame :
-GLOBTIM: 150812998 s - Global real time
-TOTDIST: 51917.0 km - Total Distance
-MAINECUV: 12.00 V - Main ECU voltage supply
-INCARTMP: -40 °C - In car temperature
===END BCMii DTC B10E7:11-6C===

===BCMii DTC U1000:00-6C===
Code: U1000 - Solid State Driver Protection Activated -Driver Disabled

Status: 
 - DTC Maturing - Intermittent at Time of Request
 - Malfunction Indicator Lamp is Off for this DTC
 - Test not complete

Module: Body Control Module

 Freeze Frame :
-GLOBTIM: 147255965 s - Global real time
-TOTDIST: 50384.0 km - Total Distance
-MAINECUV: 13.75 V - Main ECU voltage supply
-INCARTMP: -40 °C - In car temperature
===END BCMii DTC U1000:00-6C===

Posted: **Thu Jan 09, 2020 4:16 pm**

I would ask if you have had any accident damage or work done that may have damaged or altered wiring.

Or has water got in anywhere? ( I had a toyota hiace that would not turn off and it was water in a fuse panel)

I cant help other than what I found online which you have likely already done.

B10E7 FORD Possible Causes

Faulty Ignition On Relay,

Ignition On Relay harness is open or shorted

Ignition On Relay circuit poor electrical connection

Faulty Body Control Module (BCM)

Posted: **Fri Jan 10, 2020 8:49 am**

Please look at your indoor lamps like reading lamp. If they are in off position, put them on auto position which makes the lights on while you open the door and try again.

Posted: **Thu Jul 23, 2020 2:00 pm**

tugsay wrote: ↑Fri Jan 10, 2020 8:49 am Please look at your indoor lamps like reading lamp. If they are in off position, put them on auto position which makes the lights on while you open the door and try again.

Sadly this made no difference. I'm still experiencing this DTC, even right after I reset DTCs

Posted: **Sat Jul 25, 2020 2:32 pm**

Have seen it a lot but frm afar so have never need to dianose locally.

Check all you body earth points are clean and tight. Especially in engine bay.

Posted: **Sun May 30, 2021 9:23 pm**

Hi, did you resolve this at all as I am having the same code on mine?

Posted: **Sun Nov 27, 2022 12:14 pm**

I have this code problem B10E7:11-68, did you manage to locate issue and fix? if so how?

Ranger Mods

DTC Code Causes

DTC Code Causes

Re: DTC Code Causes

Re: DTC Code Causes

Re: DTC Code Causes

Re: DTC Code Causes

Re: DTC Code Causes

Re: DTC Code Causes