Ranger Mods

Is there an Intercooler temp PID for OBDLink?

If there is, when you have time, no hurry.

Try this.

INTERCOOLER TEMPERATURE ACT

Min Value: 0
Max Value: 200
Header 7E0
Mode: 22
PID: 051C
Equation: A-40

Thankyou Stewart

How would that translate into Forscan. I've never worked it out...

vfast wrote: ↑Thu Jun 13, 2019 7:24 pm How would that translate into Forscan. I've never worked it out...

I don't understand. The PID as with all of them are already in Forscan.

Is there a benefit of monitoring cooler temp aswell as (or instead of) intake temp?

Is the sensor measuring surface temp?

Intake temps are basically ambient and you will see ambient on your cluster anyway.

Intercooler air temps are going to be a more accurate way of knowing how well it is working as it is on the output side of the intercooler.

oh, ok.
I thought it was intake manifold temp.
your saying its just the airbox temp?

cooler temp makes sense then.

IAT, inake air temp is from airbox.
IAT2, Intake air temp 2 or CAC is from the left hand side of intercooler, cold side.

Being IAT is inlet temp, it would be close to ambient so no point wasting a gauge for it. IAT2 are the temps you want and is already in the UG as a standard gauge from memory.

There is no temp sensor in the inlet manifold as it uses IAT2.