Hi,
I've just installed Forscan and set it up properly, I'm using a dongle bought from Stewart.
I've been able to successfully go into the non Asbuilt BCM menu and change battery SOC to 90% and disable the double beep when you get out with the engine running and keys in your pocket. It has no problem writing at all.
I'm unable to make any changes in the non Asbuilt IPC module, each time I go to write it fails with an error "Service Procedure has been interrupted."
Depending on what I try to change in the IPC module, the fail happens at a different % of the write procedure.
I've reinstalled all drivers for the dongle, the software seems to be working for the BCM module to change, the battery voltage is 10.8 at it's lowest.
Any ideas what I'm doing wrong?
Ben
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Service Procedure Interrupted
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
I'd connect a battery charger to the car while your playing with Forscan. If your battery voltage drops too low, the write process could get interrupted.
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
-
- Junior Member
- Posts: 10
- Joined: Sun Dec 27, 2020 12:14 am
- Location: Brisbane
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 3 times
- Been thanked: 1 time
mine did exactly the same with the latest version 2.3.42
I went back to version 2.3.41 and it works perfectly.
https://forscan.org/download/FORScanSet ... 1.beta.exe
I went back to version 2.3.41 and it works perfectly.
https://forscan.org/download/FORScanSet ... 1.beta.exe