ULTRAGAUGE MGAUGE PID CALCULATOR

Wed Mar 31, 2021 5:47 pm

There is a PID listed in the Calculator for ADBlue & OBDlink, have you tried it.

Wildtrak18 · Sun May 02, 2021 11:41 am

Can anyone help with the EGTs for a Biturbo (raptor) - I'm using egrt however it seems to constantly read 2048. Everything else works fine as it did in my former 3.2 PX2

I've gone thru all the PIDs and dont seem to be having any luck. One more slight irritation is the auto gear position reads as 2 digits, in park reads 70, in reverse 60 and in drive 6+whatever gear you're in. In the image I'm in first.

: 20210502_114018.jpg (1.39 MiB) Viewed 327 times

: 20210502_114018.jpg (1.39 MiB) Viewed 327 times

Sun May 02, 2021 2:09 pm

Use EGT 11 to 13.

BigSaffer · Fri Jun 25, 2021 7:19 pm

saeb wrote: ↑Wed Jun 17, 2020 5:56 am
_Jay_ wrote: ↑Sun Jun 14, 2020 10:32 pm
Handymanjohn wrote: ↑Fri Mar 06, 2020 10:38 pm Installed the AdBlue level PID on my Ultraguage in the Everest some time back but it read 8.09% in the beginning with the tank 3/4 full. It starts to count down and got in the 7% range for a while but eventually returns to the 8.09% when the Ultraguage reboots.
I tried to setup the Adblue on a 2019 Ford Everest today using the PID information above, and get the same as Handymanjohn which is a constant reading of 8.09%. Is this correct? Does the Everest have a true % reading of adblue level, or are the level warnings triggered at a particular level kind of like a switch. e.g. value doesn’t really represent 8.09%, rather it’s just an arbitrary level or switch value and will change once Adblue drops below a predetermined switch level, such as the one that generates the “Adblue low - 2400km range” warning on the dash?
3.2 or 2.0?

I have the same issue on my 2017 3.3 Everest. Never moves of 8.1%

Liamtait83 · Thu Sep 09, 2021 6:11 pm

I'm looking at setting up the transmission fluid temp and a couple of others on my Ultra gauge for a 2017 XLT. Does it matter which mguage I change the parameters on or are there specific ones I should use? Sorry if this seems like a stupid question...

Thu Sep 09, 2021 9:05 pm

Liamtait83 wrote: ↑Thu Sep 09, 2021 6:11 pm I'm looking at setting up the transmission fluid temp and a couple of others on my Ultra gauge for a 2017 XLT. Does it matter which mguage I change the parameters on or are there specific ones I should use? Sorry if this seems like a stupid question...

Hi, I think there are 8 Mgauges available and there are none specific, you can use anyone you like

Liamtait83 · Sat Sep 11, 2021 9:22 am

Thanks heaps I'll have a go at setting one up

Frankaus · Sat Sep 25, 2021 4:20 pm

RossPat wrote: ↑Thu Sep 09, 2021 9:05 pm
Liamtait83 wrote: ↑Thu Sep 09, 2021 6:11 pm I'm looking at setting up the transmission fluid temp and a couple of others on my Ultra gauge for a 2017 XLT. Does it matter which mguage I change the parameters on or are there specific ones I should use? Sorry if this seems like a stupid question...
Hi, I think there are 8 Mgauges available and there are none specific, you can use anyone you like

Hi, guys, newbe here, i found the 8 mgauges in question, do I reprogram mgauge1to say tpms LHF (left hand Front) then load that to my page then comeback and reprogram mgauge 1 to tpms RHF and so forth, or do i have to go to mgauge 2?
Thanks in advance

Sat Sep 25, 2021 7:43 pm

Frankaus wrote: ↑Sat Sep 25, 2021 4:20 pm
RossPat wrote: ↑Thu Sep 09, 2021 9:05 pm
Liamtait83 wrote: ↑Thu Sep 09, 2021 6:11 pm I'm looking at setting up the transmission fluid temp and a couple of others on my Ultra gauge for a 2017 XLT. Does it matter which mguage I change the parameters on or are there specific ones I should use? Sorry if this seems like a stupid question...
Hi, I think there are 8 Mgauges available and there are none specific, you can use anyone you like
Hi, guys, newbe here, i found the 8 mgauges in question, do I reprogram mgauge1to say tpms LHF (left hand Front) then load that to my page then comeback and reprogram mgauge 1 to tpms RHF and so forth, or do i have to go to mgauge 2?
Thanks in advance

Yes, each wheel needs it's own Mgauge
As before you can use which ever ones you like
With only 8 Mgauges available, monitoring tyre pressures uses half of them.

Johnp-per · Thu Oct 14, 2021 9:26 pm

Thank you for this fantastic resource. Is it possible to change the L/R value to remove the decimal points? E.g. I’d like auto trans to the nearest degree, the decimals don’t matter to me.

Thu Oct 14, 2021 10:15 pm

Just use 30 instead of 32

Wazza430 · Sun Jan 09, 2022 6:12 pm

Hi everyone, just recieved my ultragauge on Friday and still trying to get my head around it all. A couple of questions.,
Is there anywhere in the gauge to monitor engine oil pressure?
For the trans slip accross convertor, what abbreviation did you use?
Sorry, these maybe dumb questions but its all new to me.
Cheers.

Sun Jan 09, 2022 6:19 pm

Senor does not support oil pressure. It is an on and off switch.

Abbreviation is entirely up to you. Use something that means something to your yourself like TC SLP etc.