Non AsBuilt not writing to ECU?
Posted: Mon Feb 07, 2022 10:06 pm
Hi
My vehicle is a new Ranger Wildtrak (UK) with keyless entry and I'd like to turn off some of the annoying chimes and honks.
This is my first time using Forscan and after reading tutorials watching YouTube videos and reading some posts on this site I dived in. Everything seemed to be going okay and my first change was to disable the double honk which went without a hitch using the Non as built menu. Problems arose in the non as built IPC module, I tried to disable both the door open and driver seat belt chimes but both would get to the write stage reach 28% then fail and come out of the module. I have tried both many times with the same result. Does anyone have any ideas what the problem might be.
Forscan v2.3.45
OBDlinkEX
My vehicle is a new Ranger Wildtrak (UK) with keyless entry and I'd like to turn off some of the annoying chimes and honks.
This is my first time using Forscan and after reading tutorials watching YouTube videos and reading some posts on this site I dived in. Everything seemed to be going okay and my first change was to disable the double honk which went without a hitch using the Non as built menu. Problems arose in the non as built IPC module, I tried to disable both the door open and driver seat belt chimes but both would get to the write stage reach 28% then fail and come out of the module. I have tried both many times with the same result. Does anyone have any ideas what the problem might be.
Forscan v2.3.45
OBDlinkEX