Ford Ranger PX3 XL headlights change out to PX3 XLT/Wildtrak Headlights
Posted: Sat Aug 28, 2021 9:20 am
Hey all
just looking for some help, i have changed the standard headlights (halogen) out on my PX3 2021 XL 4WD Ranger to the 2021 XLT/Wildtrak
(Bi-LED Type) headlights
issue im having is the DRL (LED Strip) is going out after a few minutes or a hour, sometime both headlight DRLs will go out or only one DRL will go out
all other functions of the headlights work 100% correct. low beam, high beam, park light etc and have no issues
i have gone into forscan and looked at all the DRL settings in my PX3 XL and compared these my friends 2021 wildtrak and all the settings were the same, i just changed blub type to LED not halogen
i am getting fault codes for both DRLs when they go out, B124A:11 right side and B124B:11 left side. (Circuit sort to ground), i have checked the headlight wiring pins and locations and the are correct
so i am now starting to wonder if the bright DRL LEDs are drawing to much current and popping the FETS in the BCM.... so maybe the Wildtrak and XLTs have a DRL relay or a different code in the BCM...
Any help or ideas would be great
https://www.saeb.net/download/file.php? ... ew&id=2058
Cheers
just looking for some help, i have changed the standard headlights (halogen) out on my PX3 2021 XL 4WD Ranger to the 2021 XLT/Wildtrak
(Bi-LED Type) headlights
issue im having is the DRL (LED Strip) is going out after a few minutes or a hour, sometime both headlight DRLs will go out or only one DRL will go out
all other functions of the headlights work 100% correct. low beam, high beam, park light etc and have no issues
i have gone into forscan and looked at all the DRL settings in my PX3 XL and compared these my friends 2021 wildtrak and all the settings were the same, i just changed blub type to LED not halogen
i am getting fault codes for both DRLs when they go out, B124A:11 right side and B124B:11 left side. (Circuit sort to ground), i have checked the headlight wiring pins and locations and the are correct
so i am now starting to wonder if the bright DRL LEDs are drawing to much current and popping the FETS in the BCM.... so maybe the Wildtrak and XLTs have a DRL relay or a different code in the BCM...
Any help or ideas would be great
https://www.saeb.net/download/file.php? ... ew&id=2058
Cheers