Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
PX3 TPMS Disable
-
- New Member
- Posts: 3
- Joined: Fri Jul 09, 2021 12:28 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2021
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
Hey Guys, Iv changed tyres, and to be honest its easier if i just disable the tpms rather than swap them into the new tyres. I know its done in the BCM and IPC. anyone got an exact walkthrough. Cant find anything. Cheers
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
For you
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Sun Jul 11, 2021 8:23 pm
- Location: Sydney
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 with switch
- Has thanked: 1 time
Hi,
I tried this on my Everest, but did not have an IPC module to make the second change.
I did disable TPMS in BodyCM module and the light and ignition on warning are gone, but I'm guessing it may come back in 10-20km I'm guessing (since resetting via the dashboard seemed to last about that long).
Do I maybe just need a different USB/Bluetooth dongle and chuck the Ebay one?
Thanks,
Hugh
I tried this on my Everest, but did not have an IPC module to make the second change.
Code: Select all
(OK) [13:38:13.521] Connection to adapter has been established: FTDI #1:12345678
(OK) [13:38:13.523] Adapter: ELM327 v1.4
(OK) [13:38:13.655] Connection to vehicle has been established
(OK) [13:38:17.988] Vehicle: Ford Everest Duratorq Turbo Diesel Common Rail Injection 3.2L 2017 ( 2015 MY ), VIN: MNA*********39631
(OK) [13:38:19.869] Found module: DCU - Reductant Control Module
(OK) [13:38:22.820] Found module: TCM - Transmission Control Module
(OK) [13:38:26.483] Found module: PCM - Powertrain Control Module
(OK) [13:38:34.793] Found module: OBDII - On Board Diagnostic II
(OK) [13:38:35.707] Found module: APIM - Accessory Protocol Interface Module
(OK) [13:38:36.381] Found module: PAM - Parking Aid Module
(OK) [13:38:37.078] Found module: HCM - Headlamp Control Module
(OK) [13:38:38.049] Found module: BdyCM - Body Control Module
I did disable TPMS in BodyCM module and the light and ignition on warning are gone, but I'm guessing it may come back in 10-20km I'm guessing (since resetting via the dashboard seemed to last about that long).
Do I maybe just need a different USB/Bluetooth dongle and chuck the Ebay one?
Thanks,
Hugh
---
2017 Everest Titanium, 3.2
2017 Everest Titanium, 3.2