Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.

Lightforce ROK20 - Light output test

Goochie
Donator
Donator
Posts: 146
Joined: Sat Jun 23, 2018 11:34 pm
Location: Perth
Model Of Vehicle: RANGER WILDTRAK PX2
Year Of Vehicle: 2018
Forscan Dongle Type: SAEB Forscan Dongle WIN10
Has thanked: 27 times
Been thanked: 24 times

I'm about to fit a couple of Lightforce ROK20 light to my Ranger, one each side mounted to the roof rails, facing sideways.

I did a little test last night and thought it was worth sharing the results for anyone else considering a similar setup.

These lights have a fairly narrow beam as you can see.

Light off:
no light.JPG
no light.JPG (89.42 KiB) Viewed 59 times
no light.JPG
no light.JPG (89.42 KiB) Viewed 59 times

ROK20 on:
ROK20.JPG
ROK20.JPG (162.43 KiB) Viewed 59 times
ROK20.JPG
ROK20.JPG (162.43 KiB) Viewed 59 times

I had considered using these as additional reverse lights too, but when mounted low down (tow bar level) the beam just isnt wide enough. I have some Stedi 7" light bars on their way for that and I'll try and post photos of their light output.
2018 Ranger Wildtrack (Pride Orange)
Top

Return to “Electrical”