Page 1 of 1
Service Tool Fuel Multiplier for Cylinder
Posted: Mon Mar 04, 2019 9:21 am
by m_attt
Hi just working way round forum, come from newranger.net.
Can anyone explain what Service Tool Fuel Multiplier for Cylinder means on live data.
Thanks
Re: Service Tool Fuel Multiplier for Cylinder
Posted: Mon Mar 04, 2019 6:17 pm
by saeb
No, but it must be something to do with compensating injector flow rate for fuel pressure differences.
Re: Service Tool Fuel Multiplier for Cylinder
Posted: Mon Mar 04, 2019 9:07 pm
by m_attt
I was hoping it was something along those lines as doesn't seam to be any other way of monitoring them, that get with other vehicles. I had a code for #4 an comparing all 5, #4 had a higher value.
Re: Service Tool Fuel Multiplier for Cylinder
Posted: Fri Aug 23, 2019 4:25 am
by Moses_dx
I'm searching for the option to make the pump fill my fuel fiters, but I can't find it. What am I doing wrong? Where do I look for it? there are a lot of service procedures listed, but no one says anything about fuel filling
Re: Service Tool Fuel Multiplier for Cylinder
Posted: Mon Aug 26, 2019 3:50 pm
by saeb
Don't assume that everything that may be in Fords IDS software will be in Forscan and don't assume that there is even an option for a Ranger.
Generally a Ranger starts the pump on key in ignition, if you listen carefully you should here is come on when key in, not turned.
Thinking about it I have never seen the option in IDS either. Everything is self priming.