Ranger Mods

Hey guys, went through a bog hole yesterday was about halfway up the doors got through no worries then about 5 minutes later lost power steering made it home and started her up this morning and got two fault codes U0401 network and p2598 powertrain can anyone please help me with this?

The OBDII fault code P0401 means that the engine computer has detected that the Exhaust Gas Recirculation (EGR) system flow is insufficient. The EGR system redirects a small amount of exhaust gases back into the intake. Read more how the EGR system works in this article.
What could cause the code P0401

- clogged or restricted EGR passages
- faulty EGR valve
- EGR valve stuck closed
- problems with the DPFE sensor (Ford)
- problems with hoses to the DPFE sensor (Ford)
- problem with the EGR vacuum switching valve (Toyota)
- clogged catalytic converter
- carboned up EGR temperature sensor
- vacuum supply issues at the vacuum-operated EGR valve
- electrical problems with the EGR valve control circuit
- engine computer problems

Thanks mate! Any idea of the other fault?

P2598

Turbocharger (TC) boost control position sensor A. performance problem signal low

Hi mate I found a big crack in the exhaust manifold any chance this could cause the codes?

Timmaaay wrote: ↑Wed Feb 03, 2021 6:27 pm Hi mate I found a big crack in the exhaust manifold any chance this could cause the codes?

I guess it could but I can't say with certainty is...... code P0401 means that the engine computer has detected that the Exhaust Gas Recirculation (EGR) system flow is insufficient.

Timmaaay wrote: ↑Wed Feb 03, 2021 6:27 pm Hi mate I found a big crack in the exhaust manifold any chance this could cause the codes?

No, any air escaping from there is un metered, also i have done 30k miles not km with a cracked manifold as they are on backorder