Hi,
I have a OBD2 SCAN TOOL, downloaded the app and works well, I’m trying to monitor the transmission temperature, can someone please who has done this for a 2019 XLT 2.0 10 speed, send a screenshot of the formula, I seem to have the gauge on the Car Scanner Pro App but it’s not reading the temp, it stays on Zero degrees , attached is what I was told to enter, just need to know what else I need to do, thank you.
10 speed
-
RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 1 time
- Been thanked: 19 times
Hi.
I gather you are using either an Obdlink MX or MX plus Bluetooth dongle.
There is an Obdlink ap for that on the Playstore
A transmission temp PID will need to be created for that and here is how.
Read this to learn how to create a custom PID
https://www.saeb.net/viewtopic.php?f=57&t=1459
Go here to generate the codes you need
https://www.saeb.net/viewtopic.php?f=57&t=217
I gather you are using either an Obdlink MX or MX plus Bluetooth dongle.
There is an Obdlink ap for that on the Playstore
A transmission temp PID will need to be created for that and here is how.
Read this to learn how to create a custom PID
https://www.saeb.net/viewtopic.php?f=57&t=1459
Go here to generate the codes you need
https://www.saeb.net/viewtopic.php?f=57&t=217
2018 XLT PX2 in Winning Blue