Hi all,
Not sure if it's the result of me trying or just a coincident.
The time on my left display in the Instrument Cluster is just showing --:--
I did try to use Forscan to add the DPF Gauge in which was successful and that's when I noticed this.
However, I have just reverted back to what it was before without it and it hasn't come back.
Thoughts?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Time on Instrument Cluster
-
TieNN89
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
- Attachments
-
- 20200220_181558.jpg (1.43 MiB) Viewed 119 times
- 20200220_181558.jpg (1.43 MiB) Viewed 119 times
Ranger XLS PX3 MY19.75
-
m_attt
- Donator
- Posts: 92
- Joined: Mon Mar 04, 2019 9:08 am
- Location: Plymouth UK
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
- Has thanked: 3 times
- Been thanked: 16 times
It does that, just go into the clock menu on the sync screen and adjust the hour up and down 1 hour. It will reset the cluster.
SnapOn Verus Edge 18.2
-
TieNN89
- Donator
- Posts: 78
- Joined: Fri Jan 03, 2020 11:49 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 1 time
- Been thanked: 8 times
Thanks, looks like everytime I write something using Forscan the time goes to --:-- but yes a quick adjustment of the time resets the cluster.
Ranger XLS PX3 MY19.75