Hi I have an issue with my 2017 px2 diesel ranger 3.2 when I connect my caravan to it with the engine not running and lights on to power camera on the end of the caravan a furrion 7 inch screen one the camera works perfectly but once i turn the engine on the camera stays on for about 4 or 5 seconds then turns off, something in the truck is switching the camera off or thats what i suspect.
any ideas greatly appreciated.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
No 12 v output on trailer plug.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Will depend on what pin you are using in the trailer plug although I don't think this is what you are asking.
Pin 8 will switch off as it is classed as a charging pin.
Pin 9 is direct from the battery and has power at all times. If you decide to use it.
Maybe the camera is a wireless camera? and is getting RF interference.
Probably need more info on what it is and how it is all wired, power and video.
Pin 8 will switch off as it is classed as a charging pin.
Pin 9 is direct from the battery and has power at all times. If you decide to use it.
Maybe the camera is a wireless camera? and is getting RF interference.
Probably need more info on what it is and how it is all wired, power and video.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Fri Jun 03, 2022 6:37 pm
- Location: iNVERCARGILL
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
Hi Stewart thank you for your reply, the plug on the caravan is a 7 pin flat type with the factory ford socket 12 pin on the truck, the black power wire is on pin 2 the white earth is on pin 3 and the trailer brake wire blue wire is in pin 5, the brown wire is in pin 6, red wire pin 1, green wire is pin 7 and yellow pin 4, the yellow red brown and green wires are in the wrong positions as the caravan has been wired up incorrectly, and thats the only way to get them going, but my question is once I got the truck and caravan the camera worked good as gold for about 4 months but now its doing the turn off thing.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Sounds like you had the camera power from the caravan lights in a previous post, have you checked power feed to the camera at this location when the camera turns off?
If I'm wrong please tell me how the camera gets its power.
How does the camera transmit video, wifi I guess?
If power is good and it is wifi and drops out then it could only come down to RF interference. Move the receiver away from there mirror area if it is mounted there, turn off UHF or any other TPMS devices and retest.
If I'm wrong please tell me how the camera gets its power.
How does the camera transmit video, wifi I guess?
If power is good and it is wifi and drops out then it could only come down to RF interference. Move the receiver away from there mirror area if it is mounted there, turn off UHF or any other TPMS devices and retest.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 4
- Joined: Fri Jun 03, 2022 6:37 pm
- Location: iNVERCARGILL
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
Hi saeb thank you for your suggestions, I moved the monitor from the coin tray on top of the dash and away it went works perfectly so put the aerial down and put it back were it was and it still works perfectly, so thank you again cheers.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Perfect out come, well done.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic