Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.

New Ranger setting up for caravan

A place to introduce yourself to the community
cruiserxx
New Member
New Member
Posts: 3
Joined: Wed Mar 07, 2018 3:35 pm
Location: Queensland
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017
Been thanked: 1 time

Just purchased a 2017 XLT ranger.
Looking at ways to measure transmission temp and where do you mount a CB radio antenna?
setting up to tow 2800kg caravan
Tuson trailer brake controller that networks with the fords computer.
Tuson trailer electronic sway control that brakes the trailers left or right wheels to defeat trailer sway, improves fords inbuilt trailer sway control.
Evernew1
Donator
Donator
Posts: 19
Joined: Wed Nov 15, 2017 12:04 pm
Location: Vic
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017
Been thanked: 4 times

ATF temp. I'm personally using at the moment an OBDLink MX Bluetooth dongle and Forscan Lite app on a retired Samsung Galaxy S5 phone. The phone is just mounted with some Velcro on the top of the steering column and bottom lip of the instrument panel, it blocks the auto selector indicator lights on the dash but they are pretty useless anyway.
Other people use a Scanguage or Ultraguage to read ATF temp. I also monitor things like battery charge %, tyre pressures, DPF soot load % etc with the Forscan Lite.

CB antenna. I bought on evilbay a special stainless bracket for the Ranger that goes halfway up the front fender and bent to fit in the gap between the bonnet and front fender. It uses one of the existing bolts holding the fender on so no need to drill any holes. There are also brackets available that mount at back of the bonnet near the air intake. The one I have has been on for a year and has been fine. If you intend putting one of those long heavy antennas on it though, find another way as it will sway around too much and possibly damage the paint.