Hi All,
I have purchased a set of PX3 Bi-LED Headlights, just waiting for them to arrive from Sydney. They are destined to go into a 2017 XLT, which is currently not registered (chassis stretch pending).
I am currently driving a PX1 with PX2 facelift running XLT projector headlights. I would like to fit the Bi-LEDs to the PX1 but after a lot of searching I am yet to find any useful information on whether this is actually possible and what would be required (if anything) other than the headlights.
Has anyone here done a swap like this or have any useful info? Any help would be appreciated.
Thanks, Duncan.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
PX3 Bi-LED Headlights for PX1
-
- Junior Member
- Posts: 15
- Joined: Thu Dec 17, 2020 1:22 pm
- Location: Brisbane
- Model Of Vehicle: RANGER XL PX
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN7
- Has thanked: 5 times
- Been thanked: 2 times
2015 PX1 XL Supercab
2017 PX2 XLT Subercab
2017 PX2 XLT Subercab
-
- Donator
- Posts: 199
- Joined: Fri May 26, 2017 9:52 pm
- Has thanked: 53 times
- Been thanked: 38 times
Common question. Stewart will be able to answer your question. He is a busy man so stand by.
Last edited by Lincolnland on Tue May 03, 2022 6:35 pm, edited 1 time in total.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Like most lights, run them through a relay on the bench and if they function then use a relay and existing headlight feed to switch relay.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic