This topic doesn't really fit in a particular sub-forum so this is the closest I get!
Has anyone here done a body lift themselves? I'm considering the kit from superior engineering https://www.superiorengineering.com.au/ ... er=364,355
Whilst a body lift seems like a simple way to lift the side steps etc. I'm sure it's not as simple as simply removing bolts and fitting the spacers! There must be hoses and wires that run between the chassis and body that need to be modified to make them fit?
Anyone here done it themselves (I dont mean getting a mechanic to do it for you)?
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Anyone here done a body lift themselves?
-
- Donator
- Posts: 116
- Joined: Sun Feb 25, 2018 6:02 pm
- Location: Horsham vic
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Has thanked: 47 times
- Been thanked: 7 times
I Haven't lifted the body,but if you are running 2inch lift & 33inch tyres you will need to have it engineered if you lift the body.
Px2 auto, ARB bar, 17x8 American eagle wheels, 285x70 BFG at, diff drop kit, upper control arms, Dobinson remotes front, arb rear, 3 deg diff castor wedges, Body line flares, HDI intercooler, Derale 15960, AFE trans sump
- umop3pisdn
- Junior Member
- Posts: 22
- Joined: Mon Apr 01, 2019 9:33 am
- Location: Brisbane
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 7 times
Done 255/55R16 > 285/70R17 and +2" suspension, been thinkn about doing a 1" body lift as have PIAK winchbar and don't want a monster gap below guards and headlights.
I too would like to know if anyone has done a body lift DIY and what issues/tips you may have.
Have seen steering spacers, would this be needed for a 1" lift / recommend doing anyway?
I too would like to know if anyone has done a body lift DIY and what issues/tips you may have.
Have seen steering spacers, would this be needed for a 1" lift / recommend doing anyway?
'16 PX2 XLS, +2", 33x17's, PIAK winchbar, Safari snorkel, Rhino Pioneer, GME XRS, LEDs, 13000lb winch, PX3 FX4Max dash switches, iDrive, adj.UCAs, BlackDuck covers, ARBcanopy, lotsa little tweaks... always doin something with/to it