Is there a way to disable the pre-collision?
My Ranger is waaaaayyy to sensitive, especially if it’s raining. Goes off if pass near a car, even parked ones! And goes off occasionally when braking with nothing anywhere near me. No fault codes or anything either. Is this common? Do people just put up with it?
Cheers
Adam
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Pre-collision
- rjbarrington
- Donator
- Posts: 107
- Joined: Sun May 21, 2017 8:51 pm
- Location: Wellington, New Zealand
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 30 times
- Been thanked: 11 times
Have you turned the sensitivity down? There's a menu under the driver assist settings.
Sent from my SM-A320Y using Tapatalk
Sent from my SM-A320Y using Tapatalk
2015 PX2 Wildtrak, Cool White: Alpha GSE canopy, EGR flares, Ray's FDX F6 rims, 285/70R17 C General Grabber AT3, DBA T3 discs + XP pads, Öhlins, front camera, auto-fold mirrors, OBDLink MX. Sync3, Focal speakers, Redarc Elite v3, Lightforce Facia.
-
- Junior Member
- Posts: 9
- Joined: Sun Jul 29, 2018 9:10 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Been thanked: 1 time
So it turns out the douches at ford or ironman turned the MyKey on... I only have one key, can I deactivate it using forscan? How?
Cheers
Adam
Cheers
Adam
PXII Ranger XLT, just upgraded, let the fun begin!
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Instructions are in the owners manual on how to clear MyKeys
2018 XLT PX2 in Winning Blue
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Take it back to whoever did it and tell them to fix it.
If all else fails take it to a Ford dealer and see what they say.
Stewart may have an answer for you, give him time.
If all else fails take it to a Ford dealer and see what they say.
Stewart may have an answer for you, give him time.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Think you will find Ford will need to redo PATS and that will also require an additional key to be added.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Tue Jul 10, 2018 3:40 pm
- Location: Sydney
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
My Pre-Collision is not quite as sensitive as described by the OP, But its still painful, it seems to have become more sensitive since they did the last service and update.
I have it set on the minimum sensitivity rate and before the service it was tolerable but now, it seems to be going off more regularly.
Have to get the it checked out in a few weeks with the intermediate service, hopefully it will also fix the 3 sec delay on answering a phone call to when they can hear me.
I have it set on the minimum sensitivity rate and before the service it was tolerable but now, it seems to be going off more regularly.
Have to get the it checked out in a few weeks with the intermediate service, hopefully it will also fix the 3 sec delay on answering a phone call to when they can hear me.