Am just posting this because after running cables through firewall on passenger grommet; for dcdc charger mounted behind driver seat, and switch for spot lights, and that be a major PITA, I found another rubber grommet behind the two heater hoses entry through firewall.
It is easy to pop out to drill a neat correct size hole; very solid, oval shaped with two tabs to pull back in place, no existing cable running through it, easily accessible from engine bay and under dash. Not sure I put mine back in the way it came out.
As it is quite close to exhaust some heat insulation around any wiring in that location wouldn't hurt probably/
Hopefully others might find that info useful.
See pic below
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Firewall cable penetrations PX3
-
- Junior Member
- Posts: 21
- Joined: Wed Dec 30, 2020 2:07 pm
- Location: Thailand
- Model Of Vehicle: RANGER XL PX3
- Year Of Vehicle: 2020
- Forscan Dongle Type: Other
- Been thanked: 1 time
Thats the grommet I ran my 0 gauge wire through for my stereo that connects to the the 2 batteries in the box in the cab behind the seat.
2020.
XL+.
4x2 Hi-Rider.
Extra Cab.
XL+.
4x2 Hi-Rider.
Extra Cab.