Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Clmate control not working.
-
- Donator
- Posts: 5
- Joined: Sun Mar 08, 2020 10:58 am
- Location: Greenbushes
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: ELM327 with switch
Hi.My climate contrl screen has stopped working.Any ideas why.All functions are on screen,however when i touch them nothing works.Also clock has gone missing.
Tim.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Do a reset of the Sync 3 and see if it returns. Settings/General.
Basically it cannot see the FCIM/Climate module. Do the hard buttons below the Sync 3 work for heating, cooling, fan etc. ?
Basically it cannot see the FCIM/Climate module. Do the hard buttons below the Sync 3 work for heating, cooling, fan etc. ?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 5
- Joined: Sun Mar 08, 2020 10:58 am
- Location: Greenbushes
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2019
- Forscan Dongle Type: ELM327 with switch
The hard buttons work ,but they only do screen and demist.I can also control temp and fan from my lhs dash screen,but it does not show on screen.??
Tim.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Forget the screen, the Sync 3 has nothing to do with it.
It is a FCIM issue.
You have read DTCs for the FCIM to look for any issues?
It is a FCIM issue.
You have read DTCs for the FCIM to look for any issues?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic