Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Replace 25W HID with 35W for PX3 Wildtrak?
-
- Junior Member
- Posts: 5
- Joined: Tue May 12, 2020 4:28 am
- Location: PH
- Model Of Vehicle: RANGER WILDTRAK PX3
- Year Of Vehicle: 2019
Good day. Seller sent a wrong set of D8S HID bulbs which were 35W instead of Ford's recommended 25W. I'm wondering if these can be installed onto a PX3 Wildtrak without any electrical or wiring issues due to the higher wattage?
2019 PX3 Wildtrak, Falken Wildpeaks AT3 275/65/r18
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No idea.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Thinking about it more.
I would say they will probably work but most likely will not get to the correct colour temp.
Get the correct wattage globes and be done with it.
I would say they will probably work but most likely will not get to the correct colour temp.
Get the correct wattage globes and be done with it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic