Hi.
I am new to the forum and Forscan, that being the reason I am very careful about making changes. I have figured out to activate the “Silent mode” menu and getting it working. Proud moment!
The problem I have concerns the DRL’s. The Namibian (South African) Rangers DRL are setup to be on at all times, which is a real pain. I would like to have the DRL’s off when the Light switch is in the OFF position and only working in the AUTO position. I have tried a few settings, but no luck. I tried looking for old posts concerning the topic but could not find any. Apologies if I missed it. Please help!
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
DRL Settings
-
easyflow
- Donator
- Posts: 36
- Joined: Sat Apr 28, 2018 9:52 pm
- Location: south australia
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink LX
- Has thanked: 2 times
- Been thanked: 5 times
Forscan PX2 - Non asbuilt video DRL Enable
https://www.saeb.net/viewtopic.php?p=4030#p4030
https://www.saeb.net/viewtopic.php?p=4030#p4030
stock px2 wildtrak
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Try changing this value to the opposite of what you currently have.
- drl_option.png (7.71 KiB) Viewed 178 times
- drl_option.png (7.71 KiB) Viewed 178 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
Oldtimer
- New Member
- Posts: 3
- Joined: Mon Aug 23, 2021 10:45 pm
- Location: Namibia
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 1 time
Thank you for the replies.
Steward, I did the proposed change and the DRL’s switched off, that is until I put the ignition on the next time. Then everything is back to normal.
I then made the changes as proposed in the video link easyflow posted. Problem solved! I now even have a menu option to totally switch the DRL’s off!
Thank you guys!
Steward, I did the proposed change and the DRL’s switched off, that is until I put the ignition on the next time. Then everything is back to normal.
I then made the changes as proposed in the video link easyflow posted. Problem solved! I now even have a menu option to totally switch the DRL’s off!
Thank you guys!
2016 3.2 XLT