Ranger Mods

Hi All,

I might be blind but is there somewhere that explains what each modification does and what model it will or wont work on?

Thanks heaps.

Not really, what you read/learn on this forum is it, as far as I know.

Ah OK ,I've somehow disabled my rear locker switch and cant turn traction control off now .

The buttons don't work.

Fixed it.

Dont turn on AdvanceTrack Control lol

badboybubby wrote: ↑Fri Jan 24, 2020 1:53 pm Fixed it.

Dont turn on AdvanceTrack Control lol

You should always make a backup of all modules, or at the very least the one you are about to modify.

Hi all,

I have been updating my non as built in forscan after a day of diving post update for long range tank with no issues.
i though i had saved the file for the IPC non asbuilt and i changed a lot of things. only saved the log txt file and now i have a "pre-collison assist not available" on the dash.
any ideas how to fix. it has also stopped the cruise control from working even if normal mode is selected

ford ranger 2015 px 2

Code: U2300 - Central Configuration

Additional Fault Symptom:
- Signal Plausibility Failure

Code: U0405 - Invalid Data Received From Cruise Control Module

Additional Fault Symptom:
- Invalid/Incompatible Configuration
also have the following dtc's

natcow wrote: ↑Wed Jun 17, 2020 8:52 pm Code: U2300 - Central Configuration

Additional Fault Symptom:
- Signal Plausibility Failure

Code: U0405 - Invalid Data Received From Cruise Control Module

Additional Fault Symptom:
- Invalid/Incompatible Configuration
also have the following dtc's

Use the latest version of Forscan and load factory asbuilt button or whatever it is called down the bottom. Write it and should be back to factory. Else you can PM me to arrange a remote session.