Hey all,
I am about to install a Wildtrak roller shutter onto my XLT.
Any hints or tips anyone can pass on?
Cheers in advance
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Wildtrak Roller Shutter Install
-
- Donator
- Posts: 36
- Joined: Tue May 23, 2017 8:40 am
- Location: Perth, WA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Been thanked: 5 times
I haven't attempted myself, but I obtained the attached for a mate who was contemplating it.
They also have a YouTube video on installation.
https://www.youtube.com/watch?v=tKg1YEHDRVg
Cheers,
James
They also have a YouTube video on installation.
https://www.youtube.com/watch?v=tKg1YEHDRVg
Cheers,
James
- Attachments
-
- Installation manual FORD Wildtrak.pdf
- (6.05 MiB) Downloaded 138 times
- Installation manual FORD Wildtrak.pdf
- (6.05 MiB) Downloaded 138 times
-
- MTR Wildtrak 886.030.pdf
- (2.08 MiB) Downloaded 81 times
- MTR Wildtrak 886.030.pdf
- (2.08 MiB) Downloaded 81 times
2016 Ford Ranger XLT, D/Cab, PX2, SYNC3
MCC Phoenix, Fyrlyt, TJM Airtec, ARB Sliders, EGR Flares & Canopy
Bush Skinz & TJM, ARB Frontier, Radflo & EFS, Fuel Wheels w/ KO2's
Intervolt DCC, Lightforce Fascia, GME TX3550, TowPro, Custom Drawers
MCC Phoenix, Fyrlyt, TJM Airtec, ARB Sliders, EGR Flares & Canopy
Bush Skinz & TJM, ARB Frontier, Radflo & EFS, Fuel Wheels w/ KO2's
Intervolt DCC, Lightforce Fascia, GME TX3550, TowPro, Custom Drawers
-
- New Member
- Posts: 3
- Joined: Tue Aug 20, 2019 8:21 pm
- Location: Wodonga
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Has thanked: 1 time
Thanks James for the info. I grabbed these instructions last week and printed them out, so will se how I go. It will be a little fidly to install but shouldn’t be too hard
Stock 2017 XLT
-
- New Member
- Posts: 2
- Joined: Sun May 16, 2021 1:57 pm
- Location: Murray bridge
- Model Of Vehicle: RANGER XLT PX3
- Year Of Vehicle: 2021
Hey jonbird how did you go with this install,did you install the sailplane also, any issues?