Hi All,
Joined up to check out some of the other mods out there and learn a bit more about the FORscan software. I hope it works for the PX1's as I would like to correct my tyre size.
Cheers,
Trevor.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
G'Day from Millicent
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You will have pre made settings for tyre size on a PX1 in Forscan or even the dealer tool. The programming is different to a PX2 so you will be limited in what you can and cannot do. You will be looking at the non asbuilt BCMii section in programming where after downloading the correct calibration file you will be greeted with the option list.
I will add it to my to do list, when time permit on how programming is done on a PX1.
I will add it to my to do list, when time permit on how programming is done on a PX1.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- Trevstrak
- New Member
- Posts: 2
- Joined: Sun Oct 29, 2017 7:57 pm
- Location: Millicent, SA
- Model Of Vehicle: RANGER WILDTRAK PX
- Year Of Vehicle: 2012
Thanks Stewart, Ford had told me that they only had a choice of 3 sizes and the Wildtrak already had the biggest. Since I've installed 285/65/18 Cooper LTZ's my Speedo is almost correct but I would much rather have the odometer and fuel consumption accurate. I'll have a bit of a play around when my new OBD USB adaptor comes in.
Thanks for your feedback and a heads up on where to look.
Thanks for your feedback and a heads up on where to look.
Trevor
2012 Wildtrak. 2" OME lift, 3" exhaust, ARB summit bar
2012 Wildtrak. 2" OME lift, 3" exhaust, ARB summit bar