Hi Saeb,
I notice in the Facebook Ford Ranger Club Victoria you are able to add Sync3 speed cameras.
As I have the OBD2 and Forscan can you please share what is required for this.
Thanks,
Chris.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Sync3 speed cameras
-
- Junior Member
- Posts: 14
- Joined: Mon May 22, 2017 9:56 pm
- Location: Mt Evelyn
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 2 times
- Been thanked: 2 times
2017 XLT with Tech Pack, tub replaced with tray and Tommy Camper S6X.
ARB Alum Bullbar, VRS Winch, Lovells GVM/GCM Upgrade, Redarc Tow Pro Elite.
ARB Alum Bullbar, VRS Winch, Lovells GVM/GCM Upgrade, Redarc Tow Pro Elite.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
APIM 7D0-02-02 xxx8-xxxx-xxxx then do a hard reset.In GPS settings area you will need to enable the notifications.
Some vehicles have xxx0-xxxx-xxxx so change to xxx8-xxxx-xxxx - Less trailer backup assist
Some have xxx2-xxxx-xxxx so change to xxxA-xxxx-xxxx - With trailer backup assist
I see no difference as I don't believe we have trailer assist.
I notice late model vehicle now have it enabled already, especially the Everest.
Some vehicles have xxx0-xxxx-xxxx so change to xxx8-xxxx-xxxx - Less trailer backup assist
Some have xxx2-xxxx-xxxx so change to xxxA-xxxx-xxxx - With trailer backup assist
I see no difference as I don't believe we have trailer assist.
I notice late model vehicle now have it enabled already, especially the Everest.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 10
- Joined: Tue Feb 06, 2018 7:54 pm
- Location: Melbourne
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: ELS27 Clone
- Been thanked: 1 time
Mines a Jan 18 build Wildtrack and it's not enabled - so definitely not all of them.
2018 PX2 Wildtrak
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Could you please explain how to do this a bit more to a 70yo novice, thanks
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Start here viewtopic.php?f=12&t=14 then make a decision if this is something you feel comfortable doing. If not send me a message and you can come and see me in Berwick so I make make the required changes for you.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I am in Adelaide saeb, but thanks for the offer.
I have Territory which has Sync2 and speed camera alert.
The dealer told me Sync3 doesn't have it because the software is Microsoft, Sync2 is Android.
I have Territory which has Sync2 and speed camera alert.
The dealer told me Sync3 doesn't have it because the software is Microsoft, Sync2 is Android.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Sync2 is Microsoft, Sync3 is QNX which is a form of Linux.
Sync 3 has speed cameras enabled in the Escape and some very late model Rangers and Everests. There is no consistency to whether it is enabled or not though. It is not something a dealer can do and would need to be enabled on Fords backend servers then an update applied across the range.
At the end of the day the maps do support it but at the rate Ford does map updates I would expect the cameras will never be up to date. Best to you Waze on Android Auto for that or when the next update that comes out supports Waze for Carplay then use that. Bonus is the maps will also be up to date.
Sync 3 has speed cameras enabled in the Escape and some very late model Rangers and Everests. There is no consistency to whether it is enabled or not though. It is not something a dealer can do and would need to be enabled on Fords backend servers then an update applied across the range.
At the end of the day the maps do support it but at the rate Ford does map updates I would expect the cameras will never be up to date. Best to you Waze on Android Auto for that or when the next update that comes out supports Waze for Carplay then use that. Bonus is the maps will also be up to date.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
If PC0081 and RossPat PM me the vehicles in question, VINs then I will sort it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 2
- Joined: Sat Apr 14, 2018 5:48 pm
- Location: Adelaide, SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
Heya...
Those lads with the Sync2 units, did this happen at all? I tried PM'ing saeb, but never got a response.
Cheers
Those lads with the Sync2 units, did this happen at all? I tried PM'ing saeb, but never got a response.
Cheers
2016 XLT Stock.. (done the tailgate central locking) but mods are happenin'!
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
As above, if RossPat can supply his Territory VIN then I will sort. PM please.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
So PC0081, looking at your asbuilt for Sync2 it already appears to be enabled.
Have a look in the setting area but it should be called Hazard Spot Warning. Maybe it is not enabled or your current map version does not have the required information.
You can check in Forscan.
APIM asbuilt
Line 7D0-02-02
You should have;
xxx8-xxxx-xxxx Hazard spot enabled
xxx0-xxxx-xxxx Is disabled
Some vehicles have xxx0-xxxx-xxxx so change to xxx8-xxxx-xxxx - Less trailer backup assist
Some have xxx2-xxxx-xxxx so change to xxxA-xxxx-xxxx - With trailer backup assist
I see no difference as I don't believe we have trailer assist.
Anyone with "Sync2" can check this. Sync3 appears to use the same location address.
Have a look in the setting area but it should be called Hazard Spot Warning. Maybe it is not enabled or your current map version does not have the required information.
You can check in Forscan.
APIM asbuilt
Line 7D0-02-02
You should have;
xxx8-xxxx-xxxx Hazard spot enabled
xxx0-xxxx-xxxx Is disabled
Some vehicles have xxx0-xxxx-xxxx so change to xxx8-xxxx-xxxx - Less trailer backup assist
Some have xxx2-xxxx-xxxx so change to xxxA-xxxx-xxxx - With trailer backup assist
I see no difference as I don't believe we have trailer assist.
Anyone with "Sync2" can check this. Sync3 appears to use the same location address.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
Yup, mine is set as xxx8......saeb wrote:So PC0081, looking at your asbuilt for Sync2 it already appears to be enabled.
Have a look in the setting area but it should be called Hazard Spot Warning. Maybe it is not enabled or your current map version does not have the required information.
You can check in Forscan.
APIM asbuilt
Line 7D0-02-02
You should have;
xxx8-xxxx-xxxx Hazard spot enabled
xxx0-xxxx-xxxx Is disabled
Anyone with "Sync2" can check this. Sync3 appears to use the same location address.
Sent from my SM-G930F using Tapatalk
2015 Everest Trend:
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I was after both VINS so I could make a comparison of one that did not have it and yours that did.
Anyway, it's all sorted and is the same bit changes as Sync 3 as per the above posts. Whether there is a menu item in the Sync 2 GPS and MAP settings area like Sync 3 to enable I do not know. A Sync 3 change enable a menu item that was not there previously.
Anyway, it's all sorted and is the same bit changes as Sync 3 as per the above posts. Whether there is a menu item in the Sync 2 GPS and MAP settings area like Sync 3 to enable I do not know. A Sync 3 change enable a menu item that was not there previously.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GerryP
- Moderator
- Posts: 514
- Joined: Sun May 21, 2017 8:17 pm
- Location: Karoonda SA
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 58 times
- Been thanked: 82 times
Just to clarify before I have a play... I have Sync3 v3.0 and maps v.16 (latest according to Ford?).
So, if I update 7D0-02-02 to 8xxx etc., switch ignition off - on, I should/will gain a menu entry for Hazard Spot or Speed Cameras or something along these lines in my Navigation settings?
Cheers
So, if I update 7D0-02-02 to 8xxx etc., switch ignition off - on, I should/will gain a menu entry for Hazard Spot or Speed Cameras or something along these lines in my Navigation settings?
Cheers
Gerry
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
'17 Ford Ranger PX2 XLT Supercab
Manual, Canopy, Flares, ROH Assassins, Smartbar Stealth, Solar & Dual Battery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Trying leaving ignition off for 2 minutes. If you still do not get the additional option to turn on hazard spot in your nav settings then do a reset from the general area in the Sync unit. If I get a spare minute I will do a tutorial, don't hold your breath at the minute though. Feel free to take some pics and upload if you get a chance.GerryP wrote: ↑Wed Jun 20, 2018 1:44 pm Just to clarify before I have a play... I have Sync3 v3.0 and maps v.16 (latest according to Ford?).
So, if I update 7D0-02-02 to 8xxx etc., switch ignition off - on, I should/will gain a menu entry for Hazard Spot or Speed Cameras or something along these lines in my Navigation settings?
Cheers
They are on v16 although I have seen version v17 in newer vehicles.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Well i finally got game and connected via lap top and OBDLink but i am still confused.
This is my current setting, if i am in the right place. In line 7DO-02-02 I have 0200-0000-805D so exactly what do i change?
I would greatly appreciate any help.
This is my current setting, if i am in the right place. In line 7DO-02-02 I have 0200-0000-805D so exactly what do i change?
I would greatly appreciate any help.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
This is for your vehicle only Ross - 7D0-02-02 change to 0208-0000-8065 then press write. Do a reset, then you should have the new alerts in the Nav settings.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Thanks for your time Stewart.
I cycled off/on as told and I now have a Hazard Spot Warning as an option.
I didn't do a hard reset which I assume is to restore it to factory.
If it works as is fine, if not I wii do a factory reset.
No individual write option so I had to Write All.
I backed up the module.
I cycled off/on as told and I now have a Hazard Spot Warning as an option.
I didn't do a hard reset which I assume is to restore it to factory.
If it works as is fine, if not I wii do a factory reset.
No individual write option so I had to Write All.
I backed up the module.
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Perfect, well done.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic