Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Trailer module
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Up to you mate. If you want me to run both procedures and see if it clears, I can do.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 48
- Joined: Sun May 21, 2017 11:11 pm
- Location: Illawarra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: ELM327 with switch
- Been thanked: 4 times
Hi Stewart thank you continuing to figure this out.
I know You have plenty of projects that I am sure are of more interest to you.
Thanks,
Tony.
I know You have plenty of projects that I am sure are of more interest to you.
Thanks,
Tony.
Bull bar, winch, uhf and canopy.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
All good Tony, if I see one at some point with the problem I will run both procedures and see what comes of it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Any further progress on having TRM install procedures added to Forscan yet Saeb?saeb wrote: ↑Thu Sep 07, 2017 10:10 pm Speaking with a tech today and it more then certain when the module was installed the programming was not fully completed. There are 2 steps that need to be run and most only do 1.
I will look to get the possible additional step enabled in Forscan but if anyone local wants it cleared then we can test first.
Dennis - 2016 Everest Titanium
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Sorry, no. I will add it to my notes.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
Thanks.
Dennis - 2016 Everest Titanium
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
I get the same u2100 code, had it from new. thought it was I didn't have a trailer connected or something.
2015 Everest Trend:
-
- New Member
- Posts: 4
- Joined: Wed Jan 31, 2018 6:53 pm
- Location: Shepparton
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
I also get the same two DTC errors and thought it was due to trailer not being connected. Spoke to my local Ford dealer and was palmed off saying it was nothing. They couldn't find any significant DTC.... I mentioned the idea about configuration/programming might not have been setup properly. This fell on deaf ears.
I am really interested in solving this issue. If sending through my TRM setting is of benefit please let me know.
thanks
Craig
I am really interested in solving this issue. If sending through my TRM setting is of benefit please let me know.
thanks
Craig
2017 Everest, ARB Summit bull bar, Side steps, Underbody protection and LED driving lights. Tow a Rhinomax Discovery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
No need for asbuilt data as there is no asbuilt data. Notice its all zero's?
I will see if I can get the procedures added into the next release, it will depend on when, how, what, where etc. they are up to but it will be added.
I will see if I can get the procedures added into the next release, it will depend on when, how, what, where etc. they are up to but it will be added.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Update. It will added in later releases, they are focused on other things at the moment but it will happen.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- HiroboFreak
- Donator
- Posts: 70
- Joined: Wed Aug 16, 2017 7:09 am
- Location: Central Coast NSW
- Model Of Vehicle: EVEREST TITANIUM UA
- Year Of Vehicle: 2016
- Has thanked: 4 times
- Been thanked: 3 times
You sir, are a L E G E N D!saeb wrote:Update. It will added in later releases, they are focused on other things at the moment but it will happen.
Sent from my SM-G930F using Tapatalk
Dennis - 2016 Everest Titanium
-
- New Member
- Posts: 4
- Joined: Wed Jan 31, 2018 6:53 pm
- Location: Shepparton
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
Just wondering if the trailer mod config issue has been fixed in latest forscan update?HiroboFreak wrote:You sir, are a L E G E N D!saeb wrote:Update. It will added in later releases, they are focused on other things at the moment but it will happen.
Sent from my SM-G930F using Tapatalk
Many thanks.
Sent from my SM-G950F using Tapatalk
2017 Everest, ARB Summit bull bar, Side steps, Underbody protection and LED driving lights. Tow a Rhinomax Discovery
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I don't believe they have added it yet. I'm waiting as you are.
I can confirm that in IDS when adding the module it makes changes in about 4 modules. I will follow up but if they have other priorities first then that is what they do. Will advise as soon as they give a test version with it enabled.
I can confirm that in IDS when adding the module it makes changes in about 4 modules. I will follow up but if they have other priorities first then that is what they do. Will advise as soon as they give a test version with it enabled.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Replay is that I should have a test version sooner than later.
Looking through Ford IDS again last night shows me that changes are made in the TRM, BCM, IPC and PAM.
Looking through Ford IDS again last night shows me that changes are made in the TRM, BCM, IPC and PAM.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 59
- Joined: Mon Jul 03, 2017 8:45 pm
- Location: Brisbane
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2015
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Has thanked: 13 times
- Been thanked: 5 times
Happy to test Stewart, as I have what looks like a semi configured one from Ford.
2015 Everest Trend:
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
All I can say is it is on the list. I expected it too be done but I don't control their timeline. If I get a chance over the next week or 2 I will give the changes for all the modules it effects so they can be changed manually.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
viewtopic.php?f=12&t=1512 check what your current changes are. This may or may not remove the error.
I still have no word on Forscan, I will suss it out once again this week.
I still have no word on Forscan, I will suss it out once again this week.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 11
- Joined: Wed Aug 16, 2017 7:23 am
- Location: Wollongong, NSW
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
- Has thanked: 7 times
Hi All
Had some to play today and have found some progress. The "initial configuration is not complete", I believe it is caused by the configuration being all zeros. I have been able to solve that part of the equitation by just adding a 1 to the trm module in the as built.
original TRM module asbuilt config with DTC present
Modified TRM module asbuilt No DTC present
so the only change 790-01-01 0001 9B
Now i cleared trouble codes and it hasn't returned. I put trm module asbuilt back to all 0000's and the fault code returned. Could it be that simple ???.
Now the disclaimer i have no idea what impact have a 1 in the trailer asbuilt configuration will do. (as my asbuilt came with all zero's from the factory) but i'll try it for few days and let you know
Unfortunately i still have the DDM and the PDM codes (rear door light open or short circuit). I'm working on this next.
2017 Everest trend had these codes from day 1 from the factory. Have used IDS to configure tow pack and still have same issue. I have checked my asbuilt for the other modules and it reflects the below.
Had some to play today and have found some progress. The "initial configuration is not complete", I believe it is caused by the configuration being all zeros. I have been able to solve that part of the equitation by just adding a 1 to the trm module in the as built.
original TRM module asbuilt config with DTC present
Code: Select all
790-01-01 0000 9A
790-02-01 00 9B
790-03-01 00 9C
Code: Select all
790-01-01 0001 9B
790-02-01 00 9B
790-03-01 00 9C
Now i cleared trouble codes and it hasn't returned. I put trm module asbuilt back to all 0000's and the fault code returned. Could it be that simple ???.
Now the disclaimer i have no idea what impact have a 1 in the trailer asbuilt configuration will do. (as my asbuilt came with all zero's from the factory) but i'll try it for few days and let you know
Unfortunately i still have the DDM and the PDM codes (rear door light open or short circuit). I'm working on this next.
2017 Everest trend had these codes from day 1 from the factory. Have used IDS to configure tow pack and still have same issue. I have checked my asbuilt for the other modules and it reflects the below.
Last edited by Extradry on Sat Jul 28, 2018 4:01 pm, edited 1 time in total.
Stock (for now) 2017 Everest trend
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
You would be the only Everest Ranger with something entered into the asbuilt anywhere.
I will list out the contents of the TRM next week so you know what your additions are changing.
If it has removed the DTC then that still is a positive. Well done.
I will list out the contents of the TRM next week so you know what your additions are changing.
If it has removed the DTC then that still is a positive. Well done.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 11
- Joined: Wed Aug 16, 2017 7:23 am
- Location: Wollongong, NSW
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
- Has thanked: 7 times
Yes my Everest was all zeros from dealer and my current asbuilt on motorcraft doesn't even have trm module. I have noticed that if i make a change to any of my asbuilt config, the Everest updates over the air via the wifi and updates the motorcraft asbuilt (only for APIM) after a period of time. "big brother"
Cheers
Last edited by Extradry on Sun Aug 05, 2018 9:59 pm, edited 1 time in total.
Stock (for now) 2017 Everest trend
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Sync must be pulling data back from every module.
Gerry mentioned and he could be right after all. One thing is if they can read it then it's possible they can write to it. I can only see asbuilt changes happening though as a dodgy firmware update could kill the car.
I might check my full asbuilt online next week and see if the same has happened.
Get the word around and I'm sure someone will want to lodge a class action over privacy issues.
Gerry mentioned and he could be right after all. One thing is if they can read it then it's possible they can write to it. I can only see asbuilt changes happening though as a dodgy firmware update could kill the car.
I might check my full asbuilt online next week and see if the same has happened.
Get the word around and I'm sure someone will want to lodge a class action over privacy issues.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I would say you could safely change 791-02-01 to 019C
This will enable Trailer Perimeter Alarm. I have never tested this, it's possible the alarm may sound if the trailer is unplugged?
This will enable Trailer Perimeter Alarm. I have never tested this, it's possible the alarm may sound if the trailer is unplugged?
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic