Anyone in port Lincoln today that can help. I've lost forward collision and cruise control no one at Ford can help
only here today sat 18 may travelling throug
Cheers
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Help please port LINCON SA
-
- New Member
- Posts: 3
- Joined: Fri Jun 01, 2018 10:36 am
- Location: Victoria
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
2017 3.2 XLT Dual Cab
ARB Summit Front Bar
ARB Accent Canopy
ARB Summit Front Bar
ARB Accent Canopy
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I assume you tried cycling the ignition. It is quite common error and mine did it again 2 times on the way and way back from SA.Mudboss4x4 wrote: ↑Sat May 18, 2019 11:18 am Anyone in port Lincoln today that can help. I've lost forward collision and cruise control no one at Ford can help
only here today sat 18 may travelling throug
Cheers
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- New Member
- Posts: 3
- Joined: Fri Jun 01, 2018 10:36 am
- Location: Victoria
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2017
Hi Stewart,
Yep Cycled the ignition ( Not the first time this has happened), Disconnected plug on Radar and cycled ign, disconnected battery. Cleaned Radar ( was clean and dust Free) Still Nothing Probably need radar aligned by Ford after Bull Bar Install ...
Had been working fine till I got to Whyalla - over 2500 Km done..
About to install latest ForScan now i`m home and clear DTC.
Cheers
Wayne
Yep Cycled the ignition ( Not the first time this has happened), Disconnected plug on Radar and cycled ign, disconnected battery. Cleaned Radar ( was clean and dust Free) Still Nothing Probably need radar aligned by Ford after Bull Bar Install ...
Had been working fine till I got to Whyalla - over 2500 Km done..
About to install latest ForScan now i`m home and clear DTC.
Cheers
Wayne
2017 3.2 XLT Dual Cab
ARB Summit Front Bar
ARB Accent Canopy
ARB Summit Front Bar
ARB Accent Canopy
-
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
When I first got my PX2 XLT i had the same problem on a few occasions. Always after start up and a restart would solve the issue. It has not happened for a long time.
I also had a problem from new where the Forward collision alert was useless. It turned out to be the number plate surround was just in the road of the radar. That is a genuine bullbar. So worth checking if you have just had the bar fitted prior to the problem.
I also had a problem from new where the Forward collision alert was useless. It turned out to be the number plate surround was just in the road of the radar. That is a genuine bullbar. So worth checking if you have just had the bar fitted prior to the problem.
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
It will make no difference if DTC stays or is cleared.
Twice in last 5000k is ok but still not ideal but on the way back while driving I did a CCM module reset while driving which got it up and running again and meant I did not have to stop.
I may think about adding a button inline with power to the CCM to break power to the radar which is the same as a reset and means not having to pull over.
Twice in last 5000k is ok but still not ideal but on the way back while driving I did a CCM module reset while driving which got it up and running again and meant I did not have to stop.
I may think about adding a button inline with power to the CCM to break power to the radar which is the same as a reset and means not having to pull over.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic