If you ever have an issue with startup shutdown not working one way or another then do a factory reset.
I recommend a factory reset from new, before programming anyway. If you order the unit pre programmed for Ford CAN you can still have this issue and it may crop up 2 years down the track, the day you install it or never. It can happen even if the modes are set correctly.
Having installed a new one last night after programming on the bench it will not startup but shut down so I have to reset and enter everything again. It is time consuming and a pain.
So factory reset any new unit before programming and check startup/shutdown is working first.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Startup Shutdown
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Donator
- Posts: 8
- Joined: Mon Dec 28, 2020 11:15 am
- Location: Australia
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2020
- Forscan Dongle Type: SAEB Forscan Dongle WIN10
- Been thanked: 1 time
What are the recommended settings for the Ranger/Everest for Power On and Power Off?
2020 Ford Everest Sport 3.2
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I use
Power on - Mode 2
Power off - Mode 0
Power on - Mode 2
Power off - Mode 0
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic