I have a PXII XL so I don't have the 12v socket in the tub. I am looking to use the existing wiring under the tub to wire in some lights in the tub. However it appears to be ignition activated. Is this bcm controlled and if so, is it possible to lengthen the time before it turns off?
Thanks in advance.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
12v socket in tub - time out lengthening
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Which wiring, the wiring for the 12v socket that is not fitted?
If so, it can made to time after a longer period but you would be best to run direct from the battery for what you are using it for.
If so, it can made to time after a longer period but you would be best to run direct from the battery for what you are using it for.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic