Page 1 of 1
Puddle lights?
Posted: Sat Jun 20, 2020 7:43 pm
by Brownant
Hi , I'm looking into adding some "Puddle lights " . I would like to know who to find the circuit that come on when you unlock the doors. Also i would like to find an ignition circuit. Thanks Anthony
Re: Puddle lights?
Posted: Sun Jun 21, 2020 7:53 pm
by saeb
Ideally you will get a wiring diagrams for the PX2. If not ig+ can be found here in the Ford body and equiment manual, page 52.
https://www.ford.com.au/content/dam/For ... als_au.pdf
As for the puddle lamps I will have to pull out multiple diagrams to try and explain. Won't be until later in the week or next week at this stage.
Re: Puddle lights?
Posted: Wed Jul 15, 2020 7:32 pm
by james
I just did my puddle lights on a 2016 Ranger xlt, bought a couple of wildtrak mirrors with existing puddle light sockets, plugged them straight in to the existing wiring, then ran additional wiring to the interior dome light so that the puddle light fade in and out as per a regular fit. Works perfect
Re: Puddle lights?
Posted: Thu Jul 16, 2020 8:31 pm
by saeb
james wrote: ↑Wed Jul 15, 2020 7:32 pm
I just did my puddle lights on a 2016 Ranger xlt, bought a couple of wildtrak mirrors with existing puddle light sockets, plugged them straight in to the existing wiring, then ran additional wiring to the interior dome light so that the puddle light fade in and out as per a regular fit. Works perfect
Well done for thinking out the box.
Re: Puddle lights?
Posted: Sun Aug 16, 2020 9:26 am
by Foztrek
I put a set of px3 wildtrack mirrors with puddle lights on my px3 xls and it was a straight plug and play
Re: Puddle lights?
Posted: Tue Aug 18, 2020 6:30 pm
by premier
Foztrek wrote: ↑Sun Aug 16, 2020 9:26 am
I put a set of px3 wildtrack mirrors with puddle lights on my px3 xls and it was a straight plug and play
and the puddle lights worked?
Re: Puddle lights?
Posted: Tue Aug 18, 2020 6:56 pm
by Foztrek
premier wrote: ↑Tue Aug 18, 2020 6:30 pm
Foztrek wrote: ↑Sun Aug 16, 2020 9:26 am
I put a set of px3 wildtrack mirrors with puddle lights on my px3 xls and it was a straight plug and play
and the puddle lights worked?
Yep works straight away it's all there in the factory loom
Oh and when you out wildtrak mirrors on you get heated mirrors when you put on the rear demister
Re: Puddle lights?
Posted: Mon Aug 29, 2022 10:04 am
by Nik_Lee
james wrote: ↑Wed Jul 15, 2020 7:32 pm
I just did my puddle lights on a 2016 Ranger xlt, bought a couple of wildtrak mirrors with existing puddle light sockets, plugged them straight in to the existing wiring, then ran additional wiring to the interior dome light so that the puddle light fade in and out as per a regular fit. Works perfect
Hi James, curious if you have a wiring diagram for what wires you had to use? I just picked up some Wildtrak mirrors for my 2016 XLT and would like to do the same thing.
Re: Puddle lights?
Posted: Mon Aug 29, 2022 9:24 pm
by PTnLinda
When I fitted the Clearview Next Gen towing mirrors onto my 2017 XLT the puddle lights worked without me having to do a thing. As said above wiring etc is already there just need to add the puddle lights.
Re: Puddle lights?
Posted: Tue Aug 30, 2022 1:43 pm
by Nik_Lee
I fitted the Wildtrak mirrors and all wire pins are connected so it doesn't look like I could add a circuit or that a circuit is missing but the puddle lights don't work. I wonder if it needs to be enabled on the 2016 models?