Hi All
Anyone know why I might be seeing these error codes and how I fix them?
If I clear the dtc’s they go away, but then as soon as I disconnect and then reconnect Forscan, they come back again....
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Error Code B12FF
-
Tezza
- Donator
- Posts: 85
- Joined: Sat Apr 28, 2018 7:50 pm
- Location: Australia
- Model Of Vehicle: EVEREST TREND UA
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELS27 Clone
- Has thanked: 6 times
- Been thanked: 5 times
- Attachments
-
- B700F290-1A20-4E91-9968-B4B3754092C1.jpeg (92.82 KiB) Viewed 67 times
- B700F290-1A20-4E91-9968-B4B3754092C1.jpeg (92.82 KiB) Viewed 67 times
-
- 362FA643-1E70-42DD-BCFB-E8BD79128B6A.jpeg (98.94 KiB) Viewed 67 times
- 362FA643-1E70-42DD-BCFB-E8BD79128B6A.jpeg (98.94 KiB) Viewed 67 times
Cheers Tezza
-
Bala1
- Donator
- Posts: 235
- Joined: Tue Nov 07, 2017 8:46 pm
- Location: Queensand
- Model Of Vehicle: RANGER XLT PX
- Year Of Vehicle: 2016
- Forscan Dongle Type: OBDlink MX+ Black Bluetooth
- Has thanked: 18 times
- Been thanked: 28 times
I found a Thai forum that lists the same problem, I have attached a link that should hopefully open in Google and be translated.
You need to go to about the middle of page 3.
I think what they are saying is that is with opening or closing the door while forscan is running.
https://translate.google.com/translate? ... rev=search
You need to go to about the middle of page 3.
I think what they are saying is that is with opening or closing the door while forscan is running.
https://translate.google.com/translate? ... rev=search
2016 XLT 4x4 Space cab, Aluminium Tray, Ford Steel Bull bar. Rear bumper bar fitted for parking sensors.
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Ignore it. Without re flashing DDM calibrations you are stuck with it.
99% of all Everests show this DTC from factory with no issues.
You could try and read DDM and PDM as-built then write the complete module again. This may remove it.
End result is it can be ignored.
99% of all Everests show this DTC from factory with no issues.
You could try and read DDM and PDM as-built then write the complete module again. This may remove it.
End result is it can be ignored.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic