This isn't strictly Ranger related so I hope its ok.
My dads territory had its factory radio (MyFord, is that what people refer to as Sync2?) but it was replaced by someone with a sync 3 radio.
Everyrthing seems to work, how ever when changing the temp or fan speed, it doesn't have an overlay pop-up like in the Ranger. This makes it impossible to see what your setting it to when using carplay etc.
The Temp does get shown on the top right of the screen when not in CarPlay, so the unit seems to be aware of what the Climate unit is doing.
Is there something I can change using Forscan to get this working like in the Ranger? Forscan does detect that the car has Sync 3 installed.
The territory is a 2015 SZ Mk2
Cheers,
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Climate pop-up on Territory
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
If you cannot detect the Sync3 then it will need to be upgraded on the bench. I use specific changes to get everything displaying correctly on Territory and Falcon.
Send me VIN so I can see what it did have from factory.
Send me VIN so I can see what it did have from factory.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- GenieMan
- Donator
- Posts: 61
- Joined: Thu Sep 29, 2022 10:09 pm
- Location: Australia
- Model Of Vehicle: RANGER XL PX2
- Year Of Vehicle: 2015
- Has thanked: 12 times
- Been thanked: 1 time
I’m pretty sure it does see Sync 3, it asks me about it same as my ranger does.
VIN: 6FPAAAJGATFT89274
Also attached the modules out put thing if that helps.
- Attachments
-
- territiry.txt
- (2.12 KiB) Downloaded 2 times
- territiry.txt
- (2.12 KiB) Downloaded 2 times