Hello all,
Im looking high and low for the following information.
I want to leave the stock radio deck, the 4 inch sync 3, in the truck but want to add an amp and some sub woofers but I cannot get any information on how to do this.
Specifically the adapter to get line outs and how to disable the factory amp, if there is one, and where and how to install a larger amp without replacing any of the stock wiring.
I would love some help because I have been searching for over a month now for this info. I can install anything on my own and feel I can do it cheaper then the $1600 the stereo installers are wanting to charge me.
If you can help that would be awesome.
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
American 2019 Ford Ranger
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Hit up the F150 forums in the US. This has been done a ton of times and there is no point me writing a story that has been written.
2015 plus F150 installs to Sync3 and ACM wil be pretty much identical. You also probably have the B&O system which we do not have here.
https://www.f150forum.com
2015 plus F150 installs to Sync3 and ACM wil be pretty much identical. You also probably have the B&O system which we do not have here.
https://www.f150forum.com
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic