Has anyone tested the PID setting posted here for the Transmission temp?
The OBDlink MX app comes up with a warning that things could go wrong if the wrong info is put in.
I have a XLT 2017 model and I have been told they came out with 2 different transmissions.
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Trans PID tested?
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Use this
Transmission Temperature
Min Value: 0
Max Value: 200
Header: 7E1
Mode: 22
PID: 1E1C
Equation: ((A*256)+B)*5/72-17
or
((A*256)+B)*10/160 - Test this please as it should show close to ambient temp when vehicle is cold.
Nothing will go wrong, it will work or will not work.
Transmission Temperature
Min Value: 0
Max Value: 200
Header: 7E1
Mode: 22
PID: 1E1C
Equation: ((A*256)+B)*5/72-17
or
((A*256)+B)*10/160 - Test this please as it should show close to ambient temp when vehicle is cold.
Nothing will go wrong, it will work or will not work.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Thanks saeb, both lines of code "test succeeded" once I removed one of (
I will try it out soon as it says the current temp reads 6.5 cold.
The C is not in the display but I assume it will read in Celcius
I will try it out soon as it says the current temp reads 6.5 cold.
The C is not in the display but I assume it will read in Celcius
2018 XLT PX2 in Winning Blue
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
When a custom PID is made is there a way to get the symbol to show.
psi, nm, c etc
psi, nm, c etc
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
All the calculations I do will be in maths that Australia uses in the real world. So, psi, nm, degrees celcius etc. I cannot guarantee the existing gauges in any of the programs are in the correct format but mine always are.
I cannot remember if the symbols can be shown but you could modify the gauge description to show this.
By default the modules are giving metric values before any maths are done so it does make the process a little easier for us.
I cannot remember if the symbols can be shown but you could modify the gauge description to show this.
By default the modules are giving metric values before any maths are done so it does make the process a little easier for us.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic