Page 1 of 1
Which model?
Posted: Sat Mar 21, 2020 12:23 pm
by Ranger17
Hi everyone,
I am looking for some advice/clarity on the current model Ultragauge available in Australia.
When I go to the Ultragauge Australia site, they list the MX 1.4 model but only for pre 2017 PX2 Rangers.
Apparently there is an issue with some coding. I use my Ranger as a daily drive but also tow a 2.5 Ton boat or a 2 Ton caravan so I would like to keep an eye on the usuals (Auto temp, EGR, Coolant temp etc).
So, a couple of questions:
1. Is anyone using an UltraGauge MX 1.4 Ford Ranger / Mazda BT50 Pre 2017 Build on a 2017 and onwards Ranger?
2. If so, are the issues fixable?
Thanks in advance.
Tom
Re: Which model?
Posted: Sat Mar 21, 2020 3:51 pm
by RossPat
Hi, this is the one you want
https://ultra-gauge.com/ZC/index.php?ma ... 13121b3211
You will get an option to choose
Ford Can 2008+ and the mount you require on the same page.
For the mount I would use a piece of double sided tap and the mount made by Stewart available from this site.
https://www.saeb.net/wp/product/ultragauge-bracket-rhd/
I use the same set up on my 2018 model.
I have no idea what issues they are referring to as I haven't had any.
You will need to programme it using the MGauge settings to change to custom PID's like trans temp which are all available from this site.
Tyre pressures
- 20200321_153014.jpg (3.32 MiB) Viewed 242 times
- 20200321_153014.jpg (3.32 MiB) Viewed 242 times
Eng temp and Trans temp
- 20200321_152934.jpg (3.37 MiB) Viewed 242 times
- 20200321_152934.jpg (3.37 MiB) Viewed 242 times
Re: Which model?
Posted: Sun Mar 22, 2020 2:55 pm
by saeb
Ranger17 wrote: ↑Sat Mar 21, 2020 12:23 pm
Hi everyone,
I am looking for some advice/clarity on the current model Ultragauge available in Australia.
When I go to the Ultragauge Australia site, they list the MX 1.4 model but only for pre 2017 PX2 Rangers.
Apparently there is an issue with some coding. I use my Ranger as a daily drive but also tow a 2.5 Ton boat or a 2 Ton caravan so I would like to keep an eye on the usuals (Auto temp, EGR, Coolant temp etc).
So, a couple of questions:
1. Is anyone using an UltraGauge MX 1.4 Ford Ranger / Mazda BT50 Pre 2017 Build on a 2017 and onwards Ranger?
2. If so, are the issues fixable?
Thanks in advance.
Tom
Australian seller is just an importer of the product. UG will not give reseller.
I have never known an issue on 2017+ as 2017 is identical to a 2015. If there was an issue then a ton of people here would have always had the problem.
As per Ross's post above, this is the manufactuers site. They are cheaper and it will generally land within 3 days, this may change depending on current world issues.
Re: Which model?
Posted: Sat Apr 11, 2020 6:08 pm
by Ranger17
Thanks guys, I have installed my Ultragauge MX1.4 and programmed a couple pages and I must say, I am very happy with it.
Thank you Stewart for providing the PID calculator, it really does make it easy.
One question though, I noticed on Ross's photograph that there are no decimal places for his tyre pressures. I loaded as per the PID calculator and have 2 decimal places. No big deal but looks better without the decimal places.
Re: Which model?
Posted: Sat Apr 11, 2020 10:08 pm
by RossPat
Try changing from L/R 22 to L/R 20
Let me know how you go.
Re: Which model?
Posted: Sun Apr 12, 2020 9:03 am
by Ranger17
RossPat wrote: ↑Sat Apr 11, 2020 10:08 pm
Try changing from L/R 22 to L/R 20
Let me know how you go.
Thanks Ross,
Changed L/R from 22 to 20 as suggested and all is well, no decimal places. Looks much better.
Tom