Hi all, With the help of Stewart's post and a bit of trail and error: how to program PX1/T6 remote head keys.
Also, I copied Stewart's post and just modified the steps.
Require 2 original keys.
Lay your 2 original remote head keys and new key on the passenger seat.
Sit in drivers seat and door CLOSED.
1. Insert first original key, turn to on, wait until the immobilizer light goes out on the right hand side of the cluster, turn off and remove key.
2. Immediately Insert second original key, turn to on, wait until the immobilizer light goes out on the right hand side of the cluster, turn off and remove key.
3. Insert third new key, turn on, wait approx 5 seconds, instrument cluster will chime and new key programmed.
When completed your new key will start your PX1/T6 and remote lock/unlock works.
As Stewart mentioned : "If you have one or no original keys then it is Ford or an appropriate locksmith"
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
Programming additional remote head keys PX1/T6
- waynegc123
- Junior Member
- Posts: 10
- Joined: Mon Jan 28, 2019 4:21 am
- Location: RSA
- Model Of Vehicle: RANGER WILDTRAK PX2
- Year Of Vehicle: 2016
- Forscan Dongle Type: Other
- Has thanked: 2 times
- Been thanked: 1 time
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Thanks Wayne, nice work.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic