Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.

Trailer Relay

Tjf78
Donator
Donator
Posts: 3
Joined: Fri Nov 24, 2017 9:01 pm
Location: Tamworth
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017

Hi
Any clues on what the trailer relay does in foscan, trying to get an ignition feed to activate in the plug to trigger a DCDC charger in the trailer.
Have found the pink wire to number 8 and thought this might activate but no such luck
Cheers
Tom
2017 PX2 XLT
Top
User avatar
kfa1950
Donator
Donator
Posts: 86
Joined: Wed Oct 18, 2017 6:58 am
Location: FORSTER NSW
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017
Been thanked: 19 times

Tjf78 wrote:Hi
Any clues on what the trailer relay does in foscan, trying to get an ignition feed to activate in the plug to trigger a DCDC charger in the trailer.
Have found the pink wire to number 8 and thought this might activate but no such luck
Cheers
Tom
There is no ignition feed to the trailer socket. Pin 8 is permanent battery via Trailer Module, Pin 9 is permanent battery from Fuse 64.

Sent from my moto g(7) using Tapatalk

:roll: 2017 XLT, nGauge, Canopy, Solar Panel, Dobinson Bullbar, Long Range Fuel Tank, Redarc DC2DC & Pro Elite Brake Controller, HID Globes & Driving Lights, Lightbar.
Top
Airsk
New Member
New Member
Posts: 2
Joined: Wed Sep 26, 2018 10:28 pm
Location: Illawarra
Model Of Vehicle: RANGER WILDTRAK PX2
Year Of Vehicle: 2017

Any ideas why I wouldn’t have any power in pin 8 and 9? What’s common to both? Fuses are both ok. Cheers
2017 Ford Wildtrak - automatic
ARB Summit bullbar
ARB Ascent canopy
ARB snorkel
ARB side steps
ARB underbody guards
ROH wheels
Stedi Type-x driving lights
Many other extras...
Top
User avatar
kfa1950
Donator
Donator
Posts: 86
Joined: Wed Oct 18, 2017 6:58 am
Location: FORSTER NSW
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017
Been thanked: 19 times

000198.png
000198.png (60.74 KiB) Viewed 121 times
000198.png
000198.png (60.74 KiB) Viewed 121 times
Pins 8 & 9 wiring.
:roll: 2017 XLT, nGauge, Canopy, Solar Panel, Dobinson Bullbar, Long Range Fuel Tank, Redarc DC2DC & Pro Elite Brake Controller, HID Globes & Driving Lights, Lightbar.
Top
User avatar
shallowal
Junior Member
Junior Member
Posts: 27
Joined: Sun May 05, 2019 9:24 am
Location: Mid North Coast, NSW
Model Of Vehicle: RANGER WILDTRAK PX3
Year Of Vehicle: 2019
Forscan Dongle Type: SAEB Forscan Dongle WIN10
Has thanked: 3 times
Been thanked: 2 times

Currently trying to figure out my own trailer connector and having a similar problem. Did you make any progress. I'm confused as to which pin I should be using to power the batteries in the van, ie pin 8 or 9.
TJM long range tank, Lovells HD suspension, Redarc Towpro
Top
User avatar
kfa1950
Donator
Donator
Posts: 86
Joined: Wed Oct 18, 2017 6:58 am
Location: FORSTER NSW
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017
Been thanked: 19 times

None, cable not heavy enough. Need minimum 8B&S twin from the start battery with DC-DC to Anderson Plug.

Sent from my moto g(7) using Tapatalk

:roll: 2017 XLT, nGauge, Canopy, Solar Panel, Dobinson Bullbar, Long Range Fuel Tank, Redarc DC2DC & Pro Elite Brake Controller, HID Globes & Driving Lights, Lightbar.
Top
User avatar
kfa1950
Donator
Donator
Posts: 86
Joined: Wed Oct 18, 2017 6:58 am
Location: FORSTER NSW
Model Of Vehicle: RANGER XLT PX2
Year Of Vehicle: 2017
Been thanked: 19 times

shallowal wrote:Currently trying to figure out my own trailer connector and having a similar problem. Did you make any progress. I'm confused as to which pin I should be using to power the batteries in the van, ie pin 8 or 9.
Install DC-DC in Ute with cable 8 B&S twin to Anderson plug. DC-DC can get ignition from fuse box under bonnet.

Sent from my moto g(7) using Tapatalk

:roll: 2017 XLT, nGauge, Canopy, Solar Panel, Dobinson Bullbar, Long Range Fuel Tank, Redarc DC2DC & Pro Elite Brake Controller, HID Globes & Driving Lights, Lightbar.
Top

Return to “Electrical”