Hi,
Does anyone have the PID details for the distance to last complete regeneration?
I’ve found
220434
((A<16)+(B<8)+C)*0.24
7E0
But doesn’t seem to work.
Or better yet, can anyone explain how to pull out the pid/equation details from Forscan (if possible)?
Thanks
Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
DIST_LAST_DPF
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
PID does not exist in a Ranger.
Try
220614
(E*256 + F)*1/10
km - Distance Travelled Since Last Diesel Particulate Filter (DPF) Regeneration
Try
220614
(E*256 + F)*1/10
km - Distance Travelled Since Last Diesel Particulate Filter (DPF) Regeneration
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
Thanks for the reply Stewart. Unfortunately it's not working. The PID is "active" but just returns 0km all the time. I'll keep it running to see if it needs a regeneration to occur to start the counter.
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Sorry, wrote that in a weird way but result will be the same unless something weird is going on in the software.
Cleaned and shortened. ((E*256)+F)/10
Will test on bench in next couple of days in a different way to make sure it is relevant.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
I have Distance between regens and Time between regens but that is with the Obdlink app
Distance and time can vary quite a bit between city only driving to towing a van on a 4 week trip
Same with the burn off
DPF burns off to around 25% in the city but burns off to 10% or less while towing
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Stupid mistake. It is a multi frame message and my brain was reading the data back to front.
For Torque app..........
(A * 256 + B)/10
or
((A * 256) +B)/10
Same same.
For Torque app..........
(A * 256 + B)/10
or
((A * 256) +B)/10
Same same.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Ross, you can test this in OBDlink.
Descott, you can test this in Torque.
I do not have a DPF.
OBDlink
Name Whatever
Module: 7E0
Mode: 22
PID: 0440
Equation: A:4
Torque test.
Name Whatever
Module: 7E0
PID: 220440
Equation: {B:4}
Torque maths could also use BIT(A:4) or BIT(B:4) but will need to be tested.
Result should be 0 = DPF regen in NOT active 1 = DPF regen is active
Descott, you can test this in Torque.
I do not have a DPF.
OBDlink
Name Whatever
Module: 7E0
Mode: 22
PID: 0440
Equation: A:4
Torque test.
Name Whatever
Module: 7E0
PID: 220440
Equation: {B:4}
Torque maths could also use BIT(A:4) or BIT(B:4) but will need to be tested.
Result should be 0 = DPF regen in NOT active 1 = DPF regen is active
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- RossPat
- Moderator
- Posts: 1409
- Joined: Wed Apr 04, 2018 9:33 pm
- Location: Adelaide
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2018
- Forscan Dongle Type: OBDlink MX Black Bluetooth
- Has thanked: 32 times
- Been thanked: 225 times
Stewart, I tried this today but not sure I have set it up correctly in the Min & Max values
I have Min 0 and Max1
Maybe when it does a burn it will be ok
I have Min 0 and Max1
Maybe when it does a burn it will be ok
- Attachments
-
- Screenshot_20220730-121617.jpg (194.17 KiB) Viewed 245 times
- Screenshot_20220730-121617.jpg (194.17 KiB) Viewed 245 times
-
- Screenshot_20220730-122811.jpg (177.69 KiB) Viewed 245 times
- Screenshot_20220730-122811.jpg (177.69 KiB) Viewed 245 times
2018 XLT PX2 in Winning Blue
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Just leave all other setting alone. Only add what I put write.
Should change to 1 on a regen.
Have tested with other snitch inputs on the bench with indicators etc. so as long as the PCM does switch this particular PID then it should change.
Should change to 1 on a regen.
Have tested with other snitch inputs on the bench with indicators etc. so as long as the PCM does switch this particular PID then it should change.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
Thanks, I'll test it out this week. Should be doing a regen towards the end of the week based on my km expextations
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
The updated distance formula works a treat thanks, however the regen active does not, still returns 0 during a regen. I'll try the BIT formula next
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Nothing to say it will work. Just because it is in the data that I look at for the PCM does not mean it is in the actual PCM firmware. Easier for me to test quickly on a vehicle at hand in my own time but I'm pre DPF.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
Is it possible to get the following converted to Scangauge?
220614
((A * 256) +B)/10
km - Distance Travelled Since Last Diesel Particulate Filter (DPF) Regeneration
Thank you!
220614
((A * 256) +B)/10
km - Distance Travelled Since Last Diesel Particulate Filter (DPF) Regeneration
Thank you!
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
TXD 07E0220614
RXF 046205060614
RXD 3010
MTH 0001000A0000
Should be right.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
Thanks for the quick reply Stewart. I just input the data into the Scangauge 3 but it isn’t showing up. Are you able to double check the info? As it works in torque pro.
Thanks!
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
I found another version online for 3.0L and 3.2L Powerstroke. It is in miles:
TXD 07E0220A18
RXF C562860A3718
RXD 3810
MTH 001F00320000
It looked to be working so I adjusted the MTH to convert to kilometers
MTH 007C007D0000
I'll confirm once the ranger goes through a burn whether it works 100%.
TXD 07E0220A18
RXF C562860A3718
RXD 3810
MTH 001F00320000
It looked to be working so I adjusted the MTH to convert to kilometers
MTH 007C007D0000
I'll confirm once the ranger goes through a burn whether it works 100%.
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
This should not give correct data anyway as it would not contain all data to / 10.
220614
((A * 256) +B)/10
Data is 6 bytes and not 2 so is a multi frame message. I cannot find any relevant documentation how scangauge handles this although I know it. Suggest chasing scangauge for more a more technical explanation of RXF and RXD.
It is odd that you get any data from PID 0A18 as it is not a valid PID for that engine and although the RXF does have some multipliers in there the filter looks totally wrong.
If I get time over the weekend I will flick an email through to one of the scangauge engineers with some data as 0614 is the correct PID for this engine.
220614
((A * 256) +B)/10
Data is 6 bytes and not 2 so is a multi frame message. I cannot find any relevant documentation how scangauge handles this although I know it. Suggest chasing scangauge for more a more technical explanation of RXF and RXD.
It is odd that you get any data from PID 0A18 as it is not a valid PID for that engine and although the RXF does have some multipliers in there the filter looks totally wrong.
If I get time over the weekend I will flick an email through to one of the scangauge engineers with some data as 0614 is the correct PID for this engine.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
- saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
I have sent an email to engineering for clarification and expanded information on RXF and RXD.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
- Junior Member
- Posts: 22
- Joined: Sat Apr 16, 2022 10:29 am
- Location: Canberra
- Model Of Vehicle: RANGER XLS PX2
- Year Of Vehicle: 2017
- Forscan Dongle Type: ELM327 Bluetooth
I've got no answers for you sorry (mainly as I have a limited understanding of what I'm actually doing!), other than PID 0614 returned NoData on Scangauge 3 and PID 0A18 looks to return valid data. I'll be doing a burn in 90km (my Ranger does a burn every 600km unless soot load fills up prior to that).
Dean
2017 Ranger XLS PX2 Dual Cab
2017 Ranger XLS PX2 Dual Cab