Information: Following the announcement on October 23, 2023, this site has been archived as of July 1, 2024. For further details, visit this page.
High beams won’t stay on
-
J.parsonson
- Junior Member
- Posts: 6
- Joined: Thu Jul 21, 2022 9:14 am
- Location: Tallarook
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: ELS27 Clone
Hi all, so I have an issue, if I pull back on my stalk my high beams come on, push back they come on too but won’t stay on. I have tried changing stalks, changing headlights over and still nothing. Would anyone have any idea what could cause this? [media][/media]
2015 XLT - 3” lift, 33’s, bullbar, sliders, FX4 interior, upgraded turbo, injectors, cooler, trans cooler, airbox, snorkel and exhaust
-
saeb
- Site Admin
- Posts: 4169
- Joined: Wed May 17, 2017 8:50 pm
- Location: Seaford VIC
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: Ford VCM
- Has thanked: 295 times
- Been thanked: 1063 times
Possibly someone playing with BCM or SCCM asbuilt. Write factory data and retest. From memory the last one, could be on here, that had the issue, doing this resolved it.
Stewart
Ford PX2 Supercab 2015 Automatic
Ford PX2 Supercab 2015 Automatic
-
jparsonson
- New Member
- Posts: 1
- Joined: Wed May 01, 2019 12:00 pm
- Location: melbourne
- Model Of Vehicle: RANGER XLT PX2
- Year Of Vehicle: 2015
- Forscan Dongle Type: ELS27 Clone
sorry for the late response.
I will try this when I get home on Wednesday and see what happens, fingers crossed it fixes it.
I will try this when I get home on Wednesday and see what happens, fingers crossed it fixes it.